Vega VEGAWAVE 61 Series Vibrating Level Switch Vibrating Level Switch, Cable, ATEX-Rated, Klingersil C-4400, Housing

RS庫存編號:: 768-2000
製造零件編號:: WAVES61.EEJ2RA
製造商:: Vega

Vega VEGAWAVE 61 Series Vibrating Level Switch Vibrating Level Switch, Cable, ATEX-Rated, Klingersil C-4400, Housing

此圖片僅供參考，請參閲產品詳細資訊及規格

小計（1 件）*

TWD21,595.00

(不含稅)

TWD22,674.75

訂單超過 $1,300.00 免費送貨

有庫存

9 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD21,595.00

* 參考價格

RS庫存編號:: 768-2000
製造零件編號:: WAVES61.EEJ2RA
製造商:: Vega

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Vega
	Product Type	Vibrating Level Switch
	Device Type	Vibrating Level Switch
	Mount Type	Cable
	Housing Material	Plastic Polybutylene Terephthalate
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	150°C
	Maximum DC Voltage	72V dc
	Maximum AC Voltage	253V ac
	Maximum Current	3A
	Maximum Pressure	1.1bar
	Gasket Material	Klingersil C-4400
	Standards/Approvals	Dust ATEX II 1/3 D IP6X T
	Hazardous Area Certification	ATEX
	Series	VEGAWAVE 61

	選取全部
	品牌 Vega
	Product Type Vibrating Level Switch
	Device Type Vibrating Level Switch
	Mount Type Cable
	Housing Material Plastic Polybutylene Terephthalate
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 150°C
	Maximum DC Voltage 72V dc
	Maximum AC Voltage 253V ac
	Maximum Current 3A
	Maximum Pressure 1.1bar
	Gasket Material Klingersil C-4400
	Standards/Approvals Dust ATEX II 1/3 D IP6X T
	Hazardous Area Certification ATEX
	Series VEGAWAVE 61

不適用

COO (Country of Origin):: DE

Vega Vibrating Level Switch

The Vega vibrating level switch has a relay (DPDT) output. It is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by the product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two-colour LED. Vibrating Liquid/Solid Level Probes - Squings.

All of these probes are maintenance-free and have an external LED switch status indication.

Features and Benefits

The supply voltage ranging from 20VAC to 253VAC and 20VDC to 72VDC

Process fitting material is thread G1½ PN25, DIN3852-A

Easy setup without adjustment

Product-independent switching point

Rugged sensor construction

Insensitive to build-up and statically charged products

Solid densities from 8g/l reliably detected

maintenance-free and does not wear out easily

External LED switch

Housing material PBT (plastic)

Density is greater than 100g/l

Breaking capacity maximum 750VA, 54W

Applications

Typical applications are overfill and low-level detection in media like grain, fine aggregates, sand and heavier powders such as cement and metal oxides

Almost all the bulk solids applications

Certifications

IP66 rated

IP67 rated

ATEX II 1/3 D IP6X T