SICK UP56 Series Ultrasonic Level Sensor Ultrasonic Level Sensor, Threaded, Vertical, NO-Rated, Fluorelastomer, Housing

RS庫存編號:: 213-3372
製造零件編號:: UP56-213128
製造商:: SICK

小計（1 件）*

TWD30,458.00

(不含稅)

TWD31,980.90

訂單超過 $1,300.00 免費送貨

製造商存貨

準備從 2026年6月15日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD30,458.00

* 參考價格

RS庫存編號:: 213-3372
製造零件編號:: UP56-213128
製造商:: SICK

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	SICK
	Product Type	Ultrasonic Level Sensor
	Device Type	Ultrasonic Level Sensor
	Mount Type	Threaded, Vertical
	Housing Material	Stainless Steel
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	70°C
	Interface Type	M12
	Maximum DC Voltage	30V dc
	Maximum Current	200mA
	Maximum Pressure	6bar
	Gasket Material	Fluorelastomer
	Standards/Approvals	CE Certified
	Hazardous Area Certification	NO
	Series	UP56

	選取全部
	品牌 SICK
	Product Type Ultrasonic Level Sensor
	Device Type Ultrasonic Level Sensor
	Mount Type Threaded, Vertical
	Housing Material Stainless Steel
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 70°C
	Interface Type M12
	Maximum DC Voltage 30V dc
	Maximum Current 200mA
	Maximum Pressure 6bar
	Gasket Material Fluorelastomer
	Standards/Approvals CE Certified
	Hazardous Area Certification NO
	Series UP56

Overview

At a glance

Non-contact measurement up to 3.4 m operating distance / 8.0 m scanning distance limit

Pressure resistant up to 6 bar

Converter protected by PVDF cover for increased resistance

3-in-1: Continuous measurement, switching signal, and display

Analog output can be switched 4 mA ... 20 mA and 0 V ... 10 V

Process connector thread G 1 and G 2

IP67 enclosure rating

Simple operation, also via Connect+

Your Benefit

Non-contact measurement in pressurized containers – no wear over time

Easy to set parameters, saving time

Flexible measurement system for different container sizes – standardization and stock reduction

One product for point level and continuous applications, reduces the number of sensors required

The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpressure up to 6 bar (87 psi) and is resistant against numerous difficult fluids. Wetted parts can be chosen either as stainless steel or PVDF, thus making the UP56 the perfect solution for measurement in aggressive, viscous, or abrasive liquids, or bulk solids. By combining two output signals in one device, new cost-effective solutions can be created for measurement and integration into the system. With two switching outputs, the UP56 can measure dry running and overflow in one device. Combining analog and a switching output enables continuous level measurement with a separate overflow signal. Parameters are easy to set via an integrated display, PC or the connect+ adapter.

Applications

Level measurement in the material container

Toner fill level measurement

Checking presence and fill level in the singulation system

Level measurement in the material container

Filling level measurement

Level measurement during material handling

Clogging in a compartment hopper

Dust silo filling level at a dust conveying system in the off-gas system