STMicroelectronics ALED7709ATR Lighting Controller, 42V, 4.5 V 200 mA 24-Pin QFN
- RS庫存編號:
- 275-1304
- 製造零件編號:
- ALED7709ATR
- 製造商:
- STMicroelectronics
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 包，共 2 件）*
TWD197.00
(不含稅)
TWD206.84
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 196 件從 2026年8月17日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 48 | TWD98.50 | TWD197.00 |
| 50 - 98 | TWD84.00 | TWD168.00 |
| 100 - 248 | TWD72.00 | TWD144.00 |
| 250 - 998 | TWD69.00 | TWD138.00 |
| 1000 + | TWD67.50 | TWD135.00 |
* 參考價格
- RS庫存編號:
- 275-1304
- 製造零件編號:
- ALED7709ATR
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Output Current | 200mA | |
| Product Type | Lighting Controller | |
| Input Voltage Type | DC | |
| Dimming Operation | Analogue | |
| Mount Type | Surface | |
| Package Type | QFN | |
| Number of Pins | 24 | |
| Maximum Output Voltage | 42V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Series | ALED7709ATR | |
| Length | 5.1mm | |
| Standards/Approvals | RoHS | |
| Height | 0.9mm | |
| Minimum Output Voltage | 4.5V | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Output Current 200mA | ||
Product Type Lighting Controller | ||
Input Voltage Type DC | ||
Dimming Operation Analogue | ||
Mount Type Surface | ||
Package Type QFN | ||
Number of Pins 24 | ||
Maximum Output Voltage 42V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Series ALED7709ATR | ||
Length 5.1mm | ||
Standards/Approvals RoHS | ||
Height 0.9mm | ||
Minimum Output Voltage 4.5V | ||
Automotive Standard AEC-Q100 | ||
- COO (Country of Origin):
- TH
The STMicroelectronics automotive grade LED drivers combining a boost or SEPIC controller and four low-side constant current sinkers, designed to drive strings of high brightness LEDs. The switching converter section provides the supply rail for the LED strings whose value is constantly optimized for maximum efficiency. The boost or SEPIC controller supports the external synchronization and spread spectrum. It can work simultaneously or exclusively in standalone mode (SAM), controlled only by PWMI signal and in bus driven mode (BDM) through an I2C serial interface.
AEC-Q100 Grade1 qualified
Supports battery cranking events down to 4 V supply
相關連結
- STMicroelectronics Lighting Controller, 4.5/42 V 200 mA 24-Pin QFN
- STMicroelectronics STUSB4500LBJR 24-Pin QFN
- Microchip 1-Channel USB Type C 16-Pin QFN
- MPS MP3326AGRE-P LED Driver 4.5 V 80 mA 24-Pin QFN
- Microchip UTC2000/MG 1-Channel USB Type C 16-Pin QFN
- STMicroelectronics 22V 4.1 V, 24-Pin QFN EP
- STMicroelectronics STUSB4531QTR 23V 3.3 V, 16-Pin QFN-16
- MPS MPQ3323BGRE-AEC1-P LED Driver 4.5 V 320 mA 24-Pin QFN