透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	STMicroelectronics
	LED Technology	LED Driver
	Product Type	Evaluation Board
	Kit Classification	Evaluation Board
	For Use With	LED Lighting Controls
	Featured Device	STM32F334R8, L6562AT, VIPER267KDTR
	Kit Name	300 W very high AC input voltage LED driver with digital power control
	Standards/Approvals	RoHS

	選取全部
	品牌 STMicroelectronics
	LED Technology LED Driver
	Product Type Evaluation Board
	Kit Classification Evaluation Board
	For Use With LED Lighting Controls
	Featured Device STM32F334R8, L6562AT, VIPER267KDTR
	Kit Name 300 W very high AC input voltage LED driver with digital power control
	Standards/Approvals RoHS

Datasheet - STEVAL-LLL009V1

The STEVAL-LLL009V1 digitally controlled 300 W power supply consists of power factor correction (PFC) and half-bridge LCC resonant converter power stages. An STM32F334R8 microcontroller implements DC-DC and output synchronous rectification digital control, while the PFC is driven in transition mode by the L6562AT controller. The system supports constant voltage (CV) and constant current (CC) operation.

MDmesh K5 and MDmesh DK5 Power MOSFETs are used in the PFC and LCC half-bridge, respectively, to ensure maximum efficiency, while the STripFET F7 Power MOSFET is employed to reduce conduction losses in the synchronous rectification stage on the secondary side.

Both the primary and secondary sections are supplied by an off-line flyback circuit based on VIPER267KDTR high voltage converter for ultra-wide input which provides regulated voltages to the control board, the gate driver ICs and the signal conditioning circuits.

Formal testing and measurement results confirm the ability and performance of ST power products combined with comprehensive digital control to deliver high efficiency, power factor near unity, and low THD across wide input voltage and load conditions.

System architecture based on transition mode boost PFC, half bridge LCC and synchronous rectification (full bridge)

270-480 VAC input voltage range

Output can be configured in constant current (CC) or constant voltage (CV) mode:

300 W maximum O/P power rating

CV mode: 48.5 V ± 1%

CC mode: 6.25 A ± 2.5% with voltage drop from 36 to 48 V

Peak efficiency >93.5%

Power Factor > 0.9 for load > 33% of max. load of the input voltage range

THD < 20% for load > 25% of max. load of the input voltage range

Dimming control in CC mode configuration:

0-10 V control

1% resolution

analog dimming

Soft start

Protections: I/P and O/P under and overvoltage protection, O/P open/no load circuit protection, O/P short/overload circuit protection

Digitally controlled by STM32F334R8

RoHS compliant

WEEE compliant (2012/19/UE RAEE II)

單位	每單位
1 - 4	TWD17,700.00
5 +	TWD17,346.00

STMicroelectronics STEVAL-LLL009V1 300 W very high AC input voltage LED driver with digital power control LED Driver

訂單超過 $1,300.00 免費送貨

相關連結

第一時間了解我們的最新產品和優惠

STMicroelectronics STEVAL-LLL009V1 300 W very high AC input voltage LED driver with digital power control LED Driver

訂單超過 $1,300.00 免費送貨

批發價選項

相關連結

第一時間了解我們的最新產品和優惠