Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 190A, 1.1 W

RS庫存編號:: 805-5562
製造零件編號:: 172774 P1-25/M4/K1-PG/N
製造商:: Eaton

Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 190A, 1.1 W

此圖片僅供參考，請參閲產品詳細資訊及規格

小計（1 件）*

TWD3,675.00

(不含稅)

TWD3,858.75

訂單超過 $1,300.00 免費送貨

有庫存

加上 2 件從 2026年5月04日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD3,675.00

* 參考價格

RS庫存編號:: 805-5562
製造零件編號:: 172774 P1-25/M4/K1-PG/N
製造商:: Eaton

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Eaton
	Product Type	Isolator Switch
	Number of Poles	3
	Mount Type	Panel Mount
	IP Rating	IP65
	Electrical Phase	3
	Handle Colour	Grey
	Terminal Type	Screw
	Auxiliary Contacts Available	No
	Series	P1-25
	Switching Current	190A
	Switching Power	1.1W
	Switching DC Voltage	120V dc
	Minimum Operating Temperature	-25°C
	Padlock Compatibility	No
	Switching AC Voltage	230V ac
	Maximum Operating Temperature	-25°C
	Standards/Approvals	CSA, IEC, UL
	Hazardous Area Certification	NO

	選取全部
	品牌 Eaton
	Product Type Isolator Switch
	Number of Poles 3
	Mount Type Panel Mount
	IP Rating IP65
	Electrical Phase 3
	Handle Colour Grey
	Terminal Type Screw
	Auxiliary Contacts Available No
	Series P1-25
	Switching Current 190A
	Switching Power 1.1W
	Switching DC Voltage 120V dc
	Minimum Operating Temperature -25°C
	Padlock Compatibility No
	Switching AC Voltage 230V ac
	Maximum Operating Temperature -25°C
	Standards/Approvals CSA, IEC, UL
	Hazardous Area Certification NO

登入下載 CAD 模型

豁免

Eaton Non-Fused Switch Disconnectors - P1 Series Isolators With Metal Extension Shafts

The P1 series of switch disconnectors from Eaton is compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.

With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 32 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.

With the metal extension shaft, the P1 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.

Features and Benefits

• Featuring extension shafts, the Eaton P1 switches can be mounted in electrical cabinets of up to 600mm deep, and offer a solution in many different applications due to the variety of handle and shaft options available.

• The Eaton P1 range of switch-disconnectors offers high performance and reliability paired with low power losses.

• Performs local isolation, manual override & safety switch functions.

• Switch-disconnectors have rated uninterrupted current from 13 - 32 A.

• P1 Series fit a standard front plate of 45 x 45 mm

• Shaft is metal to increase the robustness and durability of devices.

Uses and Applications

This range of isolator switches from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. This form of local isolation is most commonly needed for the repair and maintenance of electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches. Potential use in machine control panels.

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller