Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 160A, 55 kW

RS庫存編號:: 621-7866
製造零件編號:: 280921 P5-160/E
製造商:: Eaton

Eaton 3-Pole Panel Mount Isolator Switch -, IP65, 160A, 55 kW

小計（1 件）*

TWD11,686.00

(不含稅)

TWD12,270.30

訂單超過 $1,300.00 免費送貨

暫時缺貨

從 2027年1月06日發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD11,686.00

* 參考價格

RS庫存編號:: 621-7866
製造零件編號:: 280921 P5-160/E
製造商:: Eaton

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Eaton
	Product Type	Isolator Switch
	Number of Poles	3
	Mount Type	Panel Mount
	IP Rating	IP65
	Electrical Phase	3
	Handle Colour	Black
	Terminal Type	Screw
	Switching Current	160A
	Auxiliary Contacts Available	Yes
	Series	P5-160
	Switching DC Voltage	42V dc
	Switching AC Voltage	400V ac
	Padlock Compatibility	No
	Switching Power	55kW
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	50°C
	Standards/Approvals	EN, IEC, UL, VDE, ATEX, CSA
	Width	88mm
	Hazardous Area Certification	ATEX
	Depth	91mm
	Length	112mm

	選取全部
	品牌 Eaton
	Product Type Isolator Switch
	Number of Poles 3
	Mount Type Panel Mount
	IP Rating IP65
	Electrical Phase 3
	Handle Colour Black
	Terminal Type Screw
	Switching Current 160A
	Auxiliary Contacts Available Yes
	Series P5-160
	Switching DC Voltage 42V dc
	Switching AC Voltage 400V ac
	Padlock Compatibility No
	Switching Power 55kW
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 50°C
	Standards/Approvals EN, IEC, UL, VDE, ATEX, CSA
	Width 88mm
	Hazardous Area Certification ATEX
	Depth 91mm
	Length 112mm

P5−160/E Data Sheet

登入下載 CAD 模型

Eaton Panel Mount Isolator Switch

Eaton's panel mount isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring, manually disconnecting the power supply to isolated parts of the circuit. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure

• Used as an emergency switching off/emergency stop device

• The basic functions are when used as a main switch, maintenance switch or manual override switch

• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions

• Rated uninterrupted current of up to 32 A

• Lockable in the 0/OFF position, with up to three padlocks

• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

• Common accessories: 262-3784, 219-1445, 219-1439

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller