Eaton 6-Pole Panel Mount Isolator Switch -, IP65, 260A, 13 kW

RS庫存編號:: 257-9609
Distrelec 貨號:: 304-23-014
製造零件編號:: 076072 T3-3-8342/V/SVB
製造商:: Eaton

Eaton 6-Pole Panel Mount Isolator Switch -, IP65, 260A, 13 kW

小計（1 件）*

TWD3,891.00

(不含稅)

TWD4,085.55

訂單超過 $1,300.00 免費送貨

有庫存

2 件準備從其他地點送貨
加上 5 件從 2026年9月29日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD3,891.00

* 參考價格

RS庫存編號:: 257-9609
Distrelec 貨號:: 304-23-014
製造零件編號:: 076072 T3-3-8342/V/SVB
製造商:: Eaton

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Eaton
	Product Type	Isolator Switch
	Number of Poles	6
	Mount Type	Panel Mount
	IP Rating	IP65
	Electrical Phase	3
	Handle Colour	Red
	Terminal Type	Screw
	Switching Current	260A
	Series	T3-3
	Auxiliary Contacts Available	Yes
	Switching Power	13kW
	Switching AC Voltage	230V ac
	Switching DC Voltage	60V dc
	Padlock Compatibility	No
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	50°C
	Standards/Approvals	CSA, IEC, UL
	Hazardous Area Certification	No
	Length	65mm
	Width	65mm
	Depth	105mm

	選取全部
	品牌 Eaton
	Product Type Isolator Switch
	Number of Poles 6
	Mount Type Panel Mount
	IP Rating IP65
	Electrical Phase 3
	Handle Colour Red
	Terminal Type Screw
	Switching Current 260A
	Series T3-3
	Auxiliary Contacts Available Yes
	Switching Power 13kW
	Switching AC Voltage 230V ac
	Switching DC Voltage 60V dc
	Padlock Compatibility No
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 50°C
	Standards/Approvals CSA, IEC, UL
	Hazardous Area Certification No
	Length 65mm
	Width 65mm
	Depth 105mm

T3-3-8342VSVB-Datasheet

COO (Country of Origin):: GB

Eaton Rear of Panel Mounted Switch Disconnectors

The P and T range of non-fused switch disconnectors from Eaton provides safe switching, isolating and control. Robust and reliable, these high-performance devices are used primarily in industrial and engineering applications. With the added IP65 ingress protection rating they are ideal for use in harsh environments or applications that require extra protection.

Switch disconnectors are used to isolate electrical equipment before any essential maintenance or repair work can be completed. Switch disconnectors ensure electrical circuits are de-energized safely in accordance with the electricity at work regulations. Engineers and electricians are then able to carry out the necessary works without any electrical risks.

Features and Benefits

• Compact and durable

• Clear position indication

• Padlockable in the OFF position with up to 3 x 8 mm padlocks

• Rear mounting, easily and quickly fitted on to DIN rail or a base plate

• P series switches can be mounted in electrical cabinets or enclosures up to 400mm deep with an additional extension shaft

Applications

The Eaton P and T series of manually operated switch disconnectors are used in a wide range of industrial applications and installations. Some of the most common are

• Machine control panels

• Isolation of circuit breakers

• Transformers and transmission lines

• Switchgear panels

• Distribution panels

• Consumer units

Suitable Accessories include:

Extended shaft kits

• Part number 323-173 is an extended shaft kit for 20, 25 and 32A disconnect switches. They are 25mm long and up to 4 can be connected if required.

• Part number 323-189 is an extended shaft kit for 63,85 and 100A disconnect switches. They are 25mm long and up to 4 can be connected if required.

Neutral blocks

• Part number 333-495 for a 3 pole 25A add-on neutral block

• Part number 333-502 for a 3 pole 32A add-on neutral block

• Part number 333-518 for a 3 pole 63A add-on neutral block

Contact Blocks

• Part number 333-546 for a NO/NC 10A auxiliary contact block for the rear of the panel switch disconnectors. Maximum 2 blocks per switch

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.

Note

Eaton formerly known as Moeller