Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- RS庫存編號:
- 922-5665
- 製造零件編號:
- HCPL-7800A-300E
- 製造商:
- Broadcom
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 管，共 50 件）*
TWD14,615.00
(不含稅)
TWD15,346.00
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 | 每管* |
|---|---|---|
| 50 - 50 | TWD292.30 | TWD14,615.00 |
| 100 + | TWD286.50 | TWD14,325.00 |
* 參考價格
- RS庫存編號:
- 922-5665
- 製造零件編號:
- HCPL-7800A-300E
- 製造商:
- Broadcom
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Broadcom | |
| Product Type | Isolation Amplifier | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Channels | 1 | |
| Mount Type | Through Hole | |
| Package Type | DIP-8 | |
| Pin Count | 8 | |
| Vos - Input Offset Voltage | 0.3 mV | |
| Minimum Operating Temperature | -40°C | |
| Isolation Voltage | 3750Vrms | |
| CMRR - Common Mode Rejection Ratio | 76dB | |
| Isolation Type | Optical | |
| Maximum Operating Temperature | 100°C | |
| Standards/Approvals | CSA, UL 1577, IEC/EN/DIN EN 60747-5-2 | |
| Length | 9.8mm | |
| Series | HCPL-7800A | |
| Height | 1.78mm | |
| Width | 7.62 mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Broadcom | ||
Product Type Isolation Amplifier | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Number of Channels 1 | ||
Mount Type Through Hole | ||
Package Type DIP-8 | ||
Pin Count 8 | ||
Vos - Input Offset Voltage 0.3 mV | ||
Minimum Operating Temperature -40°C | ||
Isolation Voltage 3750Vrms | ||
CMRR - Common Mode Rejection Ratio 76dB | ||
Isolation Type Optical | ||
Maximum Operating Temperature 100°C | ||
Standards/Approvals CSA, UL 1577, IEC/EN/DIN EN 60747-5-2 | ||
Length 9.8mm | ||
Series HCPL-7800A | ||
Height 1.78mm | ||
Width 7.62 mm | ||
Automotive Standard No | ||
Isolating Amplifiers, Avago Technologies
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.
Various types available including:
precision isolation amplifiers
miniature isolation amplifiers
precision optically isolated voltage sensors
isolated linear sensing ICs
isolation amplifiers with short circuit and overload detection
automotive isolation amplifiers
相關連結
- HCPL-7800A-300E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP
- HCPL-7800A-000E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- HCPL-7800A-500E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP
- HCPL-7800-300E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8
- Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP
- HCPL-7510-300E Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V PDIP