Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8

RS庫存編號:: 178-3179
製造零件編號:: ACPL-782T-000E
製造商:: Broadcom

Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 管，共 50 件）*

TWD12,870.00

(不含稅)

TWD13,513.50

訂單超過 $1,300.00 免費送貨

有庫存

加上 200 件從 2026年2月02日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位	每管*
50 - 200	TWD257.40	TWD12,870.00
250 +	TWD252.30	TWD12,615.00

* 參考價格

RS庫存編號:: 178-3179
製造零件編號:: ACPL-782T-000E
製造商:: Broadcom

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Broadcom
	Product Type	Isolation Amplifier
	Minimum Supply Voltage	4.5V
	Maximum Supply Voltage	5.5V
	Number of Channels	1
	Mount Type	Through Hole
	Package Type	DIP-8
	Pin Count	8
	Isolation Voltage	3750Vrms
	CMRR - Common Mode Rejection Ratio	76dB
	Minimum Operating Temperature	-40°C
	Vos - Input Offset Voltage	0.3 mV
	Isolation Type	Reinforced
	Maximum Operating Temperature	125°C
	Length	9.8mm
	Width	7.62 mm
	Height	1.78mm
	Series	ACPL-782T
	Standards/Approvals	UL 1577, IEC 60747-5-5, CSA, DIN EN 60747-5-2(VDE 0884 Teil 2)
	Automotive Standard	AEC-Q100

	選取全部
	品牌 Broadcom
	Product Type Isolation Amplifier
	Minimum Supply Voltage 4.5V
	Maximum Supply Voltage 5.5V
	Number of Channels 1
	Mount Type Through Hole
	Package Type DIP-8
	Pin Count 8
	Isolation Voltage 3750Vrms
	CMRR - Common Mode Rejection Ratio 76dB
	Minimum Operating Temperature -40°C
	Vos - Input Offset Voltage 0.3 mV
	Isolation Type Reinforced
	Maximum Operating Temperature 125°C
	Length 9.8mm
	Width 7.62 mm
	Height 1.78mm
	Series ACPL-782T
	Standards/Approvals UL 1577, IEC 60747-5-5, CSA, DIN EN 60747-5-2(VDE 0884 Teil 2)
	Automotive Standard AEC-Q100

ACPL-782T Automotive Isolation Amplifier Data Sheet

Isolating Amplifiers, Avago Technologies

The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide precise measurements of phase current and bus voltage in motor drives, power inverters and voltage signals in general isolation circuits. These isolation amplifiers offer high CMR (common mode rejection) performance and built-in safety insulation. They are a suitable alternative to the Hall Effect isolation amplifiers, for current and voltage sensing in power converters.

Various types available including:

precision isolation amplifiers

miniature isolation amplifiers

precision optically isolated voltage sensors

isolated linear sensing ICs

isolation amplifiers with short circuit and overload detection

automotive isolation amplifiers

Broadcom 1-Channel Isolation Amplifier, 8-Pin 5.5 V DIP-8

訂單超過 $1,300.00 免費送貨

Isolating Amplifiers, Avago Technologies

相關連結