Molex Crimp Extraction Tool, T0201 Series, Crimp Contact, Extraction Tool Contact, Contact size 24/18 AWG

Use this high-quality extraction tool from Molex to effectively disconnect crimp terminals from connectors without damaging them. It's designed for use with contact sizes ranging from 24 to 18AWG (American Wire Gauge), making it a versatile choice. The tool works by latching onto the terminals and pushing them out of the connectors. The metal probe is durable enough to withstand the impact of the extraction force. This material also makes the component corrosion-resistant, so you can rest assured it will last a long time.

• Ergonomically designed handle for comfortable operation

• Domestic wiring

Align the tool with the terminal and insert the tool into the connector until the locking tabs are depressed, rotating the tool in the process. This will allow the terminal push-out pin to push the terminal back through the connector hole. If the locking tabs are not fully depressed, tightly grip the wires and push them towards the extraction tool.

A range of 1.57mm Diameter Standard .062" Pin and Socket Crimp Terminal contacts available as gold-plated or tinned versions for use with receptacles housings stock number 236-2928 typically and for plug housings 236-2984 typically

• Shell Material: Nylon UL 94-V2

• Consumer Electronics

A range of Molex Standard .062" products that are suitable for either Power or Signal applications. Housings of the Standard .062" system are polarized and locking is by passive (friction) lock between the plug and the socket via a projection moulded on to the socket. The Standard .062" system housings take male or female round crimp terminals which allows for orientation in any direction.

See stock number 501-051 for Ratcheting Hand Crimp Tool.
See stock number 710-6499 for none ratchet type Hand Crimp Tool.
See stock number 178-6935 for Insertion Tool.
See stock number 178-6957 for Extraction Tool.