4D Systems microCAM-III uCAM-III Image Sensor, 1 fps UART, 5-Pin
- RS庫存編號:
- 175-7755
- 製造零件編號:
- uCAM-III
- 製造商:
- 4D Systems
可享批量折扣
小計(1 件)*
TWD1,774.00
(不含稅)
TWD1,862.70
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 55 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD1,774.00 |
| 5 + | TWD1,721.00 |
* 參考價格
- RS庫存編號:
- 175-7755
- 製造零件編號:
- uCAM-III
- 製造商:
- 4D Systems
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | 4D Systems | |
| Series | microCAM-III | |
| Product Type | Image Sensor | |
| Frame Rate | 1fps | |
| Interface Type | UART | |
| Mount Type | Through Hole | |
| Pin Count | 5 | |
| Length | 32mm | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 9V | |
| Minimum Operating Temperature | -30°C | |
| Colour Sensing | RGB | |
| Pixel Size W x H | 5.55 x 5.55 μm | |
| Maximum Operating Temperature | 85°C | |
| Width | 32 mm | |
| Height | 15.6mm | |
| Standards/Approvals | No | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 4D Systems | ||
Series microCAM-III | ||
Product Type Image Sensor | ||
Frame Rate 1fps | ||
Interface Type UART | ||
Mount Type Through Hole | ||
Pin Count 5 | ||
Length 32mm | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 9V | ||
Minimum Operating Temperature -30°C | ||
Colour Sensing RGB | ||
Pixel Size W x H 5.55 x 5.55 μm | ||
Maximum Operating Temperature 85°C | ||
Width 32 mm | ||
Height 15.6mm | ||
Standards/Approvals No | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
4D Systems serial camera module
The 4D Systems uCAM-III highly integrated serial camera module attachable to any host system that requires a video camera or a JPEG compressed still camera, and is the new upgrade to the popular uCAM-II that is backwards compatible but includes some additional features. The module uses a CMOS VGA colour sensor along with a JPEG compression chip that provides a low cost and low powered camera system. The uCAM-III come in a compact form factor with a built-in lens and a 5 wire connector that provides easy access to both power and serial data. The uCAM-III ship with the 56-degree lens installed. It is used in embedded devices.
Features and Benefits
• 5VDC nominal supply
• Additions lenses available
• Built-in colour conversion circuits for 16 bit CrYCbY, 8-bit grey, 16 bit RGB or standard JPEG images
• Built-in down sampling, clamping and windowing circuits for VGA, QVGA or 160x120 image resolutions
• Compact in dimensions 32mmx32mmx21mm (without lens, including header)
• Locking nut for locking focus in place
• No external DRAM required
• On-board EEPROM provides a command-based interface to the external host via TTL serial link
• On-board VGA colour sensor and RAW/JPEG CODEC for different resolutions
• Small size, low cost and low powered camera module
• UART: up to 3.68Mbps for transferring JPEG still pictures or raw images
相關連結
- 4D Systems Camera Accessory Lens Camera
- 4D Systems uVGA-III Graphics Controller IC 800 x 480 pixel I2C, UART 30-Pin TQFP
- 4D Systems
- Hamamatsu Photonics S10077 Image Sensor 927 fps, 12-Pin LCP
- Hamamatsu Photonics S10077 S10077 Image Sensor 927 fps, 12-Pin LCP
- 4D Systems 4D Programming Cable Programming Cable for use with 4D Systems Modules
- 4D Systems 4D CLEARCORE
- onsemi LUPA300 Image Sensor 250 fps Serial-SPI, 48-Pin LCC
