Schaffner, 250V ac 2A Panel Mount IEC Filter Male None 1 Fuse, Faston
- RS庫存編號:
- 188-9618
- Distrelec 貨號:
- 169-66-672
- 製造零件編號:
- FN9260-2-06
- 製造商:
- Schaffner
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 件）*
TWD639.00
(不含稅)
TWD670.95
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 301 件準備從其他地點送貨
- 加上 1,188 件從 2026年11月23日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 14 | TWD639.00 |
| 15 - 29 | TWD624.00 |
| 30 + | TWD616.00 |
* 參考價格
- RS庫存編號:
- 188-9618
- Distrelec 貨號:
- 169-66-672
- 製造零件編號:
- FN9260-2-06
- 製造商:
- Schaffner
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Schaffner | |
| Product Type | IEC Filter | |
| Number of Fuses | 1 | |
| Fuse Size | 5 x 20 mm | |
| Current | 2A | |
| Switch Type | None | |
| Connector Gender | Male | |
| Voltage | 250V ac | |
| Mount Type | Panel Mount | |
| Operating Frequency | 0Hz, 400Hz | |
| IEC Connector Type | IEC/EN 60939 | |
| Maximum Operating Temperature | 85°C | |
| Termination Type | Faston | |
| Minimum Operating Temperature | -25°C | |
| Contact Gender | Male | |
| Standards/Approvals | No | |
| Height | 46mm | |
| Width | 35mm | |
| Depth | 60.3mm | |
| 選取全部 | ||
|---|---|---|
品牌 Schaffner | ||
Product Type IEC Filter | ||
Number of Fuses 1 | ||
Fuse Size 5 x 20 mm | ||
Current 2A | ||
Switch Type None | ||
Connector Gender Male | ||
Voltage 250V ac | ||
Mount Type Panel Mount | ||
Operating Frequency 0Hz, 400Hz | ||
IEC Connector Type IEC/EN 60939 | ||
Maximum Operating Temperature 85°C | ||
Termination Type Faston | ||
Minimum Operating Temperature -25°C | ||
Contact Gender Male | ||
Standards/Approvals No | ||
Height 46mm | ||
Width 35mm | ||
Depth 60.3mm | ||
Double Fused FN9260
The FN9260 power entry module combines an IEC inlet, mains filter with excellent filter attenuation and fuses in a small form factor. A wide selection on amperage ratings, output connections, mounting possibilities and filters for medical applications are designed to offer you the desired solution.
Can be used in a wide range of applications such as portable electrical & electronic equipment, medical equipment, household equipment, single-phase power supplies, switch-mode power supplies and test & measurement equipment.
Versions up to 10 A are available with fuse holder for one or two fuses
Optional safety version (A type)
Complies with IEC/EN 60601-1
Snap-in versions (S type)
Schaffner Type FN Fused/Fused and Switched
IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically RS stock no. 526-0724). Accept 20 x 5mm dia. fuses. Fuses not included.
Approvals
UL recognised component, CSA certified, VDE
Warning
Neutral line must not be fused where it is referenced to earth.