Siemens Memory Card Memory Card For Use With HMI Wincc Flexible 2008 SP1 and Higher for OP77, TP/OP 277, MP 377 and MP

This memory card is a reliable storage solution designed specifically for HMI devices. With a robust capacity of 512MB, it is compatible with various models including Mobile Panel 177, Mobile Panel 277, and OP 77. Measuring 24mm in width, 32mm in height, and 2.1mm in thickness, it offers flexible installation options to suit your specific needs.

• Supports up to 10,000 insertion cycles for durability

• Used with Mobile Panel 177 for enhanced performance

This memory card operates effectively in environments ranging from 0°C to 50°C, and can be stored in temperatures from -20°C to 60°C. Ensure relative humidity does not exceed 90% during operation, and avoid condensation for optimal performance.

The built-in write protection switch prevents accidental data modifications. Its effectiveness depends on the specific HMI device in use, adding an extra layer of security for crucial information.

Integration of this memory card with your HMI system enables efficient data management and storage, ensuring continuity in operations and reducing the risk of data loss during critical processes. Adhering to the provided installation guidelines is essential for compatibility.

Accessories for SIMATIC HMIs

Memory Cards

OP77B

Control and interface panels for systems or machines controlled via Simatic logic controllers.On-screen 'buttons' can be used to control input/output and data bits, allowing them to be set, reset, toggled or dynamically triggered. Similarly buttons can be used to switch to other process diagrams, change the contrast or recalibrate the touch screen.Buttons can be labelled with either graphics or text; the graphics can also be configured as screen-filling background diagrams. They can be created with any editing software with an "OLE" facility such as Paint-Shop, Designer, Corel-Draw, etc. Labelling of process diagrams and values with freely scalable fixed text is also possible.,These panels allow the displaying and changing of process parameters with input/output fields; process parameters (V, M, E, A, T and Z) are displayed and can be changed with a system keyboard, e.g. for temperature settings, speeds, etc.

320 x 240 Pixel display