可享批量折扣
小計（1 件）*
TWD2,159.00
(不含稅)
TWD2,266.95
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 6 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD2,159.00 |
| 5 + | TWD1,776.00 |
* 參考價格
- RS庫存編號:
- 790-4851
- 製造商:
- RS PRO
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | RS PRO | |
| Element Type | Band Heater | |
| Power Rating | 130 W | |
| Supply Voltage | 240 V | |
| Width | 25mm | |
| Diameter | 50 mm | |
| Peak Temperature | +300°C | |
| Lead Length | 1m | |
| Dimensions | 50 (Dia.) x 25 mm | |
| 選取全部 | ||
|---|---|---|
品牌 RS PRO | ||
Element Type Band Heater | ||
Power Rating 130 W | ||
Supply Voltage 240 V | ||
Width 25mm | ||
Diameter 50 mm | ||
Peak Temperature +300°C | ||
Lead Length 1m | ||
Dimensions 50 (Dia.) x 25 mm | ||
- COO (Country of Origin):
- CN
Sealed Mica Nozzle Heaters
These nozzle heaters are hermetically sealed for liquid plastic within the manufacturing process. These types of heaters are used to give long life where normal mica heaters cannot last as long due to process leakages.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.
These heaters are typically used on injection moulding machines, extruders, dies, moulds and process machinery.
Constructed by winding resistance wire
Insulated and terminal connections fitted
Encased in brass casing which gives good mechanical strength and protection
Supply voltage is 230 V
Up to 300 °C
Cable length is 1m
Available in various sizes
Insulated and terminal connections fitted
Encased in brass casing which gives good mechanical strength and protection
Supply voltage is 230 V
Up to 300 °C
Cable length is 1m
Available in various sizes
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.