Acim Jouanin Formable Coil Heater, 1.65m, 1 kW, 230 V ac
- RS庫存編號:
- 374-3160
- 製造零件編號:
- RCF/TC1000
- 製造商:
- Acim Jouanin
可享批量折扣
單價（不含稅） 個**
TWD13,778.00
(不含稅)
TWD14,466.90
(含稅)
當前暫無庫存，可於02/01/2025發貨，6 工作日送達。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD13,778.00 |
| 5 - 9 | TWD13,501.00 |
| 10 + | TWD13,363.00 |
** 參考價格
- RS庫存編號:
- 374-3160
- 製造零件編號:
- RCF/TC1000
- 製造商:
- Acim Jouanin
Cold-formed heating resistors
Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.
Strip Heating Elements
Note
To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them
Warning
For reasons of safety the heater block and/or heater sheath must be bonded to earth
Approvals
UL Recognised; CSA Certified