Transcend M.2 128 GB Internal SSD

RS庫存編號:: 683-196
製造零件編號:: TS128GMTS970T-VS1
製造商:: Transcend

小計（1 件）*

TWD6,414.00

(不含稅)

TWD6,734.70

訂單超過 $1,300.00 免費送貨

供應短缺

2 件準備從其他地點送貨

我們目前的可售庫存有限，並且我們的供應商預計會出現供應短缺的狀況。

單位	每單位
1 +	TWD6,414.00

* 參考價格

RS庫存編號:: 683-196
製造零件編號:: TS128GMTS970T-VS1
製造商:: Transcend

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Transcend
	Memory Size	128GB
	Product Type	SSD
	Sub Type	SSD
	Internal/External	Internal
	Form Factor	M.2
	Industrial Grade	Yes
	NAND Type	3D
	Interface Type	SATA III 6 Gb/S
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	75°C
	Height	3.58mm
	Standards/Approvals	UKCA
	Width	22mm
	Length	80mm

	選取全部
	品牌 Transcend
	Memory Size 128GB
	Product Type SSD
	Sub Type SSD
	Internal/External Internal
	Form Factor M.2
	Industrial Grade Yes
	NAND Type 3D
	Interface Type SATA III 6 Gb/S
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 75°C
	Height 3.58mm
	Standards/Approvals UKCA
	Width 22mm
	Length 80mm

Datasheet - TS128GMTS970T-VS1

COO (Country of Origin):: TW

Transcend SSD, 128GB Memory size, M.2 Form Factor - TS128GMTS970T-VS1

This solid-state drive provides compact, high-performance storage for internal industrial systems. Designed for integration on an M.2 interface, it supports SATA III 6Gb/s signalling and is intended for use in environments that demand sustained operation under elevated and low temperatures.

Features and Benefits:

• 128GB capacity for adequate application and data storage
• 3D NAND architecture enabling improved endurance and density
• Industrial-grade construction suited to continuous operation
• Operating range from -20°C to 75°C for harsh environments
• SATA III 6Gb/s Interface for compatible system throughput

Applications

• Suitable for embedded controllers in automation equipment
• Ideal for industrial PCs in electrical and mechanical systems
• Used with data-logging modules requiring continuous write cycles
• Can be used for firmware storage in robotics and control units

What form factor must my host accept to fit this drive?

It uses an M.2 form factor with an 80mm board length compatible with standard M.2 2280 mounting.

Which physical dimensions are critical for enclosure design?

The module width is 22mm and the component profile is 3.58mm high, important for slot clearance and heat dissipation planning.

What NAND technology is implemented and why does it matter?

The device employs 3D NAND, which increases cell density and typically improves write endurance compared with Planar NAND for long-term data retention.

Is this device intended for internal or external deployment?

It is designed solely as an internal storage module for integration within host systems.

What regulatory marking is present for regional acceptance?

It carries the UKCA approval, indicating conformity with applicable UK product requirements.