Transcend M.2 128 GB Internal SSD

N
查看所有Hard Drives

小計（1 件）*

TWD5,972.00

(不含稅)

TWD6,270.60

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 1 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD5,972.00

* 參考價格

RS庫存編號:
683-185
製造零件編號:
TS128GMTE460TI-VS1
製造商:
Transcend
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Transcend

Product Type

SSD

Sub Type

SSD

Memory Size

128GB

Internal/External

Internal

Form Factor

M.2

Industrial Grade

Yes

NAND Type

3D

Interface Type

PCI

Maximum Operating Temperature

85°C

Minimum Operating Temperature

-40°C

Standards/Approvals

UKCA

Height

3.58mm

Length

42mm

Width

22mm

Transcend SSD, 128GB Storage Capacity, M.2 Form Factor - TS128GMTE460TI-VS1


This M.2 NVMe SSD is an internal storage device designed for embedded and industrial applications where compact, high-temperature operation is required. It connects via a PCIe Gen3 x2 Interface to provide solid-state storage in a 42mm form factor suitable for space-constrained electronics. The drive employs 3D NAND memory and is available in a 128GB capacity, meeting UKCA standards for use in regulated environments.

Features and Benefits:


• NVMe PCIe Gen3 x2 Interface for low-latency data transfers
• 128GB capacity supporting embedded storage requirements
• Industrial-grade design enabling extended operational life
• Operates from −40 to 85°C for high-temperature deployments
• 3D NAND architecture delivering sustained flash performance

Applications


• Suitable for industrial control systems in automation
• Ideal for onboard storage in robotics and mechatronics
• Used for data logging in environmental monitoring units
• Can be used for gateway and edge computing modules
• Used with Compact single-board computers for embedded projects

What mechanical footprint should I plan for when integrating this drive?


The drive uses the M.2 2242 form factor with a 22mm width and 42mm length, which fits sockets designed for 2242 modules and requires a maximum height allowance of 3.58mm.

Which environments are appropriate given its operating temperature range?


It is suitable for installations exposed to extremes, operating continuously between −40°C and 85°C, making it appropriate for factory floors and outdoor enclosures without Active cooling.

How does the Interface choice affect system compatibility?


The NVMe PCIe Gen3 x2 signalling requires a motherboard or controller that supports PCIe lanes for M.2 NVMe devices

it will not operate in sockets limited to SATA M.2 signalling.

What regulatory marking does it carry for UK deployments?


The drive is compliant with UKCA marking requirements, indicating adherence to applicable UK product regulations.

Is this device intended for internal or external use?


The unit is specified for internal installation within equipment and enclosures rather than as an external, hot-pluggable device.

相關連結