Name: Transcend M.2 1 TB Internal SSD
Brand: Transcend
SKU: 682-749
Price: 33645 TWD
Availability: BackOrder

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Transcend
	Sub Type	SSD
	Memory Size	1TB
	Product Type	SSD
	Internal/External	Internal
	Form Factor	M.2
	Industrial Grade	Yes
	NAND Type	3D
	Interface Type	SATA III 6 Gb/S
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	75°C
	Height	3.58mm
	Length	80mm
	Width	22mm
	Standards/Approvals	UKCA

	選取全部
	品牌 Transcend
	Sub Type SSD
	Memory Size 1TB
	Product Type SSD
	Internal/External Internal
	Form Factor M.2
	Industrial Grade Yes
	NAND Type 3D
	Interface Type SATA III 6 Gb/S
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 75°C
	Height 3.58mm
	Length 80mm
	Width 22mm
	Standards/Approvals UKCA

Datasheet - TS1TMTS960T-VS1

COO (Country of Origin):: TW

Transcend SSD, 1TB Storage Capacity, M.2 Form Factor - TS1TMTS960T-VS1

This internal SSD is designed for industrial environments where compact, high-capacity storage is required. It fits into M.2 slots and provides solid-state storage suitable for embedded and automation equipment, delivering fast data access via a SATA III 6Gb/s Interface while operating across a wide temperature range.

Features and Benefits:

• 1TB capacity for large on-board datasets and logs
• 3D NAND technology for dense flash storage and endurance
• SATA III 6Gb/s Interface for consistent throughput in legacy hosts
• Operates up to 75°C to withstand high-temperature installations
• Works from -20°C to support cold-start conditions
• UKCA approved for deployment within UK regulatory frameworks

Applications

• Suitable for industrial controllers in automation systems
• Ideal for data logging in electrical and electronics assemblies
• Used with embedded computing modules in mechanical equipment
• Can be used for firmware storage in control and monitoring units

How is the module form factor relevant to hardware integration?

Its M.2 form factor and 80mm length allow direct mounting on motherboards and carrier boards designed for M.2 2280 devices, reducing cabling and saving panel space.

What makes it appropriate for harsh operating environments?

The specified maximum operating temperature of 75°C and minimum of -20°C enable operation in elevated thermal conditions and sub-zero starts common in industrial settings.

Which Interface is required on host systems for compatibility?

Hosts must provide an M.2 slot wired for SATA signalling supporting the SATA III 6Gb/s protocol to communicate with the device.

What physical profile should be considered during mechanical design?

The module has a width of 22mm and a height of 3.58mm, so enclosures and standoffs must accommodate a low-profile M.2 card.

Is this storage classified for industrial use and how is that indicated?

It is designated as industrial grade and carries UKCA marking, signifying suitability for industrial deployments within the UK.

Transcend M.2 1 TB Internal SSD

訂單超過 $1,300.00 免費送貨