Spelsberg TK PS Series Grey Grey Lid Polystyrene Enclosure, IP66, IK07, 63 mm x 182 mm x 180 mm

Grey (RAL 7035) glass-fibre reinforced polystyrene base and cover with knockouts. The Polystyrene box enclosure also includes polyurethane sealing, and polyamide 6 fibre glass reinforced cover screws.

48 mm;External height 62 mm

Rated insulation voltage 1000 V DC;Rated insulation voltage 690 V AC

No, this enclosure is not suitable for outdoor use.;This enclosure is sealable

Yes, there are cable entries with this model.

This article is completely silicone free.;Also free from heavy metal and PVC.

Both are plastic and resistant to rust and corrosion and will not dent – unlike metal. Both at halogen free which is important to consider for applications where the possibility of fire can lead to exposure to harmful fumes.;Polystyrene is stronger than budget material like plastic, withstand knocks and has fair cable retention.;Polycarbonate is recommended for applications that may sustain heavy impact, better UV protection, resistant to temperature changes, external and internal use.

An enclosure box with knockouts is a hole that is built into the enclosure that has covering of plastic material covering the area of the required hole. You simply break the plastic material and you have a ready-made hole for mounting.

The TK-PS series from Spelsberg is an empty enclosure with pre-pressed metric knockouts designed to house a wide range of electrical, electronic and pneumatic equipment. The enclosure base is made from grey polystyrene and there is a choice of either a transparent polycarbonate or grey polystyrene lid. The TK-PS has a IP66 rating and is resistant to most acids and alkalis.

IP66 ingress protection acc. EN 60529 / DIN VDE 0470-1

cULus.