Eaton 30A Panel Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 25V

RS庫存編號:: 852-7272
Distrelec 貨號:: 304-02-382
製造零件編號:: HKP-R
製造商:: Eaton

Eaton 30A Panel Mount Fuse Holder, 1P-Pole for 5 x 20 mm, 25V

可享批量折扣

小計（1 件）*

TWD367.00

(不含稅)

TWD385.35

訂單超過 $1,300.00 免費送貨

有庫存

加上 629 件從 2026年5月25日起發貨
加上 450 件從 2026年6月01日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 9	TWD367.00
10 - 24	TWD364.00
25 - 49	TWD355.00
50 - 249	TWD347.00
250 +	TWD288.00

* 參考價格

RS庫存編號:: 852-7272
Distrelec 貨號:: 304-02-382
製造零件編號:: HKP-R
製造商:: Eaton

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Eaton
	Product Type	Panel Mount Fuse Holder
	Number of Poles	1
	Body Material	Thermoset
	IP Rating	IP53
	Compatible Fuse Size	5 x 20 mm
	Maximum Operating Temperature	150°C
	Standards/Approvals	UL Recognised
	Contact Material	Tin Plated Brass
	Series	HKP
	Cap Style	Manual
	Terminal Type	Solder

	選取全部
	品牌 Eaton
	Product Type Panel Mount Fuse Holder
	Number of Poles 1
	Body Material Thermoset
	IP Rating IP53
	Compatible Fuse Size 5 x 20 mm
	Maximum Operating Temperature 150°C
	Standards/Approvals UL Recognised
	Contact Material Tin Plated Brass
	Series HKP
	Cap Style Manual
	Terminal Type Solder

Eaton Panel Mount Fuse Holder, Bayonet Knob, For 6.3 (W) x 32mm (H) Fuse Size - HKP-R

Put your fuse firmly in its place with this panel-mount holder from Eaton. It's fully enclosed to withstand the knocks and bumps of a busy industrial or commercial environment. Inserting and replacing the fuse is a breeze, thanks to the unit's bayonet knob. Simply push and turn it anti-clockwise to open the holder, then place the fuse into the carrier section. When you've finished, replace the holder and secure it again with the bayonet – easy as pie.

Features & Benefits

• "Fuse" is clearly printed on the cap for easy identification

• Tin-plated terminals for a reliable connection

• Durable black thermoplastic is suitable for use in temperatures up to +150°C

• Compact dimensions of 59.1 x 19.9mm won't add unnecessary bulk to your setup

How do I mount the fuse holder on my panel?

You'll need to make a mounting hole of 12.8mm ± 0.13mm x 12.0mm ± 0.13mm, with one side flattened for protection against rotation. Then push the fuse holder into the hole and secure it with the hexagonal locking nut.

Does it matter how thick the panel is?

You can mount the device on panels up to 7.9 mm thick.

Note

Eaton formerly known as Bussmann