Schurter 10A Panel Mount Fuse Holder for 6.3 x 32mm Fuse, 1P, 600V ac

此圖片僅供參考，請參閲產品詳細資訊及規格

查看所有Fuse Holders
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
RS庫存編號:
173-9699
製造零件編號:
0031.1624
製造商:
Schurter
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Schurter

Fuse Holder Type

Panel Mount

Fuse Size

6.3 x 32mm

Current Rating

10 A, 20A

Voltage Rating

600V ac

Number of Poles

1P

Includes Indicator

No

Compatible Fuse Length

32mm

Standards Met

CSA C22.2 No. 4248.1, cULus Recognised, E39328, IEC 60127-6, UL 4248-1, VDE

Contact Material

Tin Plated Copper Alloy

Terminal Type

Quick Connect

International Protection Rating

IP40

Cap Style

Finger Grip

Series

FEC

Protection Category

PC2

Compatible Fuse Diameter

6.3mm

COO (Country of Origin):
CH

Schurter FEC Series


Schurter FEC series panel mount fuse holders for 5 x 20 or 6.3 x 32 mm cartridge fuses. The FEC series have quick connect terminals and area available with a finger grip or slotted cap.

For appliances in unattended use
Low profile fuse holder with insulation walls
Panel Mount
IP40 Rated
Quick connect terminals

Schurter FEC Series Fingergrip Panel Mount Fuse Holders


The Schurter FEC series 10A, 20A panel mount fuse holder offers high current and voltage ratings of 10A, 20A and 600VAC/DC respectively. This makes it ideal to use in harsh environments. The body of this holder is made of thermoset material and tin plated copper alloy is used for contact. It has captive type fuse carrier.

Features and Benefits


• Compatible fuse dimension is 6.3mmx32mm
• Low profile fuse holder with insulation walls
• Protection against electric shock
• Quick connect terminal type of 6.3mmx0.8mm

Applications


• Appliances in unattended use
• General circuit protection
• Vehicle electrical circuits

Certifications


• CSA certified
• IEC529 certified
• IP40 rated
• UL 4248-1 approved

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.



Panel Mounting


CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.

相關連結