Eaton 25A 6.3 x 32 mm, Bolt Mount Bolt Down Fuse Block, 300V ac/dc
- RS庫存編號:
- 852-7219
- 製造零件編號:
- S-8002-1-R
- 製造商:
- Eaton
可享批量折扣
小計（1 件）*
TWD62.00
(不含稅)
TWD65.10
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年9月14日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 9 | TWD62.00 |
| 10 - 24 | TWD61.00 |
| 25 - 49 | TWD60.00 |
| 50 - 99 | TWD59.00 |
| 100 + | TWD55.00 |
* 參考價格
- RS庫存編號:
- 852-7219
- 製造零件編號:
- S-8002-1-R
- 製造商:
- Eaton
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Eaton | |
| Product Type | Fuse Block | |
| Fuse Type | Bolt Down | |
| Fuse Size | 6.3 x 32 mm | |
| Number of Fuses | 1 | |
| Current Rating | 25A | |
| Voltage | 300V ac/dc | |
| Minimum Operating Temperature | 0°C | |
| Mount Type | Bolt Mount | |
| Maximum Operating Temperature | 60°C | |
| Body Material | Thermoplastic | |
| Standards/Approvals | RoHS. UL E14853, CSA 47235 | |
| Dielectric Strength | 600V | |
| Holder Terminal Type | Solder | |
| For Use With | 6.3 x 32 mm Fuse | |
| Clip Material | Spring Bronze | |
| Series | S-8000 | |
| 選取全部 | ||
|---|---|---|
品牌 Eaton | ||
Product Type Fuse Block | ||
Fuse Type Bolt Down | ||
Fuse Size 6.3 x 32 mm | ||
Number of Fuses 1 | ||
Current Rating 25A | ||
Voltage 300V ac/dc | ||
Minimum Operating Temperature 0°C | ||
Mount Type Bolt Mount | ||
Maximum Operating Temperature 60°C | ||
Body Material Thermoplastic | ||
Standards/Approvals RoHS. UL E14853, CSA 47235 | ||
Dielectric Strength 600V | ||
Holder Terminal Type Solder | ||
For Use With 6.3 x 32 mm Fuse | ||
Clip Material Spring Bronze | ||
Series S-8000 | ||
- COO (Country of Origin):
- US
Cooper Bussmann Fuse Block - S-8000 Series
The S-8000 Series from Cooper Bussmann offers a professional range of Fuse Blocks from single pole to 12 pole units.
Tight cluster mounting
Single pole to 12 pole units
300 Volt Rating
Choice of solder, quick connect (QC) or screw terminals
UL Recognised
Panel Mounting
CATEGORIES OF PROTECTION AGAINST ELECTRIC SHOCK,PC1: No integral protection against electric shock. If required, designers must provide additional protection against electric shock on equipment.,PC2: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 standard test finger, when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.,PC3: With integral protection against electric shock. Fuse-holders shall have live parts inaccessible to IEC529 1mm diameter rigid test wire when fully assembled, without fuse carrier or fuse in place and when fuse carrier, with fuse is being inserted or withdrawn.
Note
Eaton formerly known as Bussmann