Huco Friction Clutch, 6mm Bore 132Ncm
- RS庫存編號:
- 890-3045
- 製造零件編號:
- 279P25.22.RS
- 製造商:
- Huco
14 現貨庫存，可於6工作日發貨。
已增加
單價（不含稅） 個
TWD1,477.00
(不含稅)
TWD1,550.85
(含稅)
| 單位 | Per unit |
| 1 - 24 | TWD1,477.00 |
| 25 - 49 | TWD1,418.00 |
| 50 + | TWD1,359.00 |
- RS庫存編號:
- 890-3045
- 製造零件編號:
- 279P25.22.RS
- 製造商:
- Huco
法例與合規
- COO (Country of Origin):
- GB
產品詳細資訊
Basic 6 Plate Adjustable Friction Clutches with Set Screw and Clamp Fixings
Friction clutches from Huco Vari-Tork designed with adjustable drag or slip torque. Controlled slip takes place between the hub and housing whenever the load exceeds the set torque.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
Features and Benefits
• Compact proportions
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device
Product Application Information
As a torque limiter, Vari-Tork interrupts continuity between the power source and load when it reaches a pre-determined level.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
