Hirose, FH35 0.3 mm Pitch 51 Way Right Angle Female FPC Connector, ZIF Top Contact
- RS庫存編號:
- 166-5040
- 製造零件編號:
- FH35W-51S-0.3SHW(99)
- 製造商:
- Hirose
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
- RS庫存編號:
- 166-5040
- 製造零件編號:
- FH35W-51S-0.3SHW(99)
- 製造商:
- Hirose
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Hirose | |
| Product Type | FPC Connector | |
| Number of Contacts | 51 | |
| Contact Material | Phosphor Bronze | |
| Sub Type | FFC | |
| Current | 200mA | |
| Pitch | 0.3mm | |
| Mount Type | Surface | |
| Connector Gender | Female | |
| Termination Type | ZIF Top Contact | |
| Insertion Force | ZIF | |
| Orientation | Right Angle | |
| Locking Mechanism | Yes | |
| Voltage | 30V ac | |
| Minimum Operating Temperature | -55°C | |
| Series | FH35 | |
| Maximum Operating Temperature | 85°C | |
| Contact Gender | Female | |
| Number of Rows | 2 | |
| Standards/Approvals | No | |
| Contact Plating | Gold | |
| Housing Material | Liquid Crystal Polymer, Polyamide | |
| 選取全部 | ||
|---|---|---|
品牌 Hirose | ||
Product Type FPC Connector | ||
Number of Contacts 51 | ||
Contact Material Phosphor Bronze | ||
Sub Type FFC | ||
Current 200mA | ||
Pitch 0.3mm | ||
Mount Type Surface | ||
Connector Gender Female | ||
Termination Type ZIF Top Contact | ||
Insertion Force ZIF | ||
Orientation Right Angle | ||
Locking Mechanism Yes | ||
Voltage 30V ac | ||
Minimum Operating Temperature -55°C | ||
Series FH35 | ||
Maximum Operating Temperature 85°C | ||
Contact Gender Female | ||
Number of Rows 2 | ||
Standards/Approvals No | ||
Contact Plating Gold | ||
Housing Material Liquid Crystal Polymer, Polyamide | ||
- COO (Country of Origin):
- JP
0.3mm Pitch Top Contact FPC ZIF Connectors - FH35W Series
FH35W series 0.3mm pitch Flexible Printed Circuit ZIF connectors with rotating Back-Flip actuator allowing easy insertion. These 0.3mm pitch Flexible Printed Circuit ZIF connectors are 0.9 mm above board and are the only ultra-low profile ZIF connectors that allow the use of standard 0.2mm thick FPC.
Low profile, only 0.9mm above board and 3.2mm wide
Unique rotating 'Back-Flip' actuator
Entry chamfers on all sides of FPC insertion slot to aid accurate insertion
Accepts standard 0.2mm thick flexible printed circuit board
No exposed contacts on bottom of connector enabling mounting over conductive traces
Halogen free as defined by IEC61249-2-21
UL94VHB flame retardent