Sensata / Cynergy3 RSF40 Series Horizontal Nitrile Rubber (NBR) Float Switch, 500 mm Cable, NO/NC, 240 V ac ac Max, 120

Ensure that the fluid level in your tank is always within a specified range using this internal float switch from Sensata Cynergy3. It's a simple and reliable way to prevent overfilling in your systems. For versatility, the unit can be used with most liquids, including solvents, greases and oils. By using a switch like this, you can prevent the loss of dangerous or valuable fluids and minimise maintenance downtime.

• Compact switch length of 88 mm suits applications where space is limited

You can use this switch for either NO (normally open) or NC (normally closed) operation. When it's in the NO position, the float switch will close and activate the electricity to the pump as the liquid rises to a pre-set level. When in the NC position, it opens and cuts off electricity when the liquid rises to a pre-set level.

Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.

WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.

• Nylon

• Operating temperature: -10 °C to +120 °C

These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.

Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.