Microchip Split Gate 8 MB SPI Flash Memory 8-Pin SOIC
- RS庫存編號:
- 145-9393
- 製造零件編號:
- SST26WF080B-104I/SN
- 製造商:
- Microchip
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
小計(1 管,共 100 件)*
TWD3,900.00
(不含稅)
TWD4,095.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年4月06日 發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每管* |
|---|---|---|
| 100 - 400 | TWD39.00 | TWD3,900.00 |
| 500 + | TWD37.10 | TWD3,710.00 |
* 參考價格
- RS庫存編號:
- 145-9393
- 製造零件編號:
- SST26WF080B-104I/SN
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Memory Size | 8MB | |
| Product Type | Flash Memory | |
| Interface Type | SPI | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Organisation | 1M x 8 Bit | |
| Maximum Clock Frequency | 104MHz | |
| Mount Type | Surface | |
| Cell Type | Split Gate | |
| Minimum Supply Voltage | 1.65V | |
| Maximum Supply Voltage | 1.95V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.25mm | |
| Length | 4.9mm | |
| Standards/Approvals | No | |
| Width | 4 mm | |
| Maximum Random Access Time | 3ns | |
| Series | SST26WF080B | |
| Automotive Standard | No | |
| Number of Bits per Word | 8 | |
| Number of Words | 1M | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Memory Size 8MB | ||
Product Type Flash Memory | ||
Interface Type SPI | ||
Package Type SOIC | ||
Pin Count 8 | ||
Organisation 1M x 8 Bit | ||
Maximum Clock Frequency 104MHz | ||
Mount Type Surface | ||
Cell Type Split Gate | ||
Minimum Supply Voltage 1.65V | ||
Maximum Supply Voltage 1.95V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 1.25mm | ||
Length 4.9mm | ||
Standards/Approvals No | ||
Width 4 mm | ||
Maximum Random Access Time 3ns | ||
Series SST26WF080B | ||
Automotive Standard No | ||
Number of Bits per Word 8 | ||
Number of Words 1M | ||
- COO (Country of Origin):
- TH
SST26WF040B/080B/016B Serial Quad I/O (SQI) SuperFlash® Flash Memory
From Microchip the SST26WFxxxB family of products are Serial Quad I/O (SQI) Flash Memory devices available in 4-, 8- and 16-bit variants. These devices support full command-set compatibility with Serial Peripheral Interface (SPI) protocol and enable minimum latency Execute-in-Place (XIP) capability without the need for code shadowing on an SRAM. The SST26WFxxxB devices exhibit low power consumption, making them suitable for portable battery powered applications.
Features
Operating Voltage Range 1.6 to 1.95 V
Clock Frequency 104 MHz max
Serial Interface Architecture
Low Power Consumption: Active Read Current: 15 mA (typical at 104 MHz), Standby Current: 10 μA (typical)
Burst Modes: Continuous Linear Burst, 8/16/32/64 Byte Linear Burst with Wrap-Around
Page-Program: 256 Bytes per page in x1 or x4 mode
Fast Erase Time: Sector/Block Erase 18 MS (typ), 25 MS (max); Chip Erase 35 MS (typ), 50 MS (max)
Flexible Erase Capability
End-of-Write Detection
Write-Suspend
Software Protection
Software Reset (RST) Mode
SFDP (Serial Flash Discoverable Parameters)
Flash Memory, Microchip
相關連結
- Microchip 8Mbit SPI Flash Memory 8-Pin SOIC, SST26WF080B-104I/SN
- Microchip 8Mbit SPI SST26VF080A-104I/SN
- Microchip 16Mbit Quad-SPI Flash Memory 8-Pin SOIC, SST26VF016B-104I/SN
- Microchip NOR 64kB SPI Flash Memory 8-Pin SOIC, SST26VF016BEUI-104I/SN
- Microchip 4Mbit SPI SST26VF040A-104I/SN
- Microchip 2Mbit SPI SST26VF020A-104I/SN
- Microchip 64Mbit SPI Flash Memory 16-Pin SOIC, SST26VF064B-104I/SO
- Microchip 64Mbit SPI SST26VF064BT-104I/SO
