Festo MS Filter Regulator, 40 μm, 3/8 in G, Manual, 20 bar, 611737

RS庫存編號:: 342-160
製造零件編號:: MS6-LFR-3/8-D7-E-R-M-E11
製造商:: Festo

Festo MS Filter Regulator, 40 μm, 3/8 in G, Manual, 20 bar, 611737

小計（1 件）*

TWD6,816.00

(不含稅)

TWD7,156.80

訂單超過 $1,300.00 免費送貨

製造商存貨

準備從 2026年6月01日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD6,816.00

* 參考價格

RS庫存編號:: 342-160
製造零件編號:: MS6-LFR-3/8-D7-E-R-M-E11
製造商:: Festo

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Festo
	Product Type	Filter Regulator
	Port Size	3/8 in G
	Maximum Operating Pressure	20 bar
	Maximum Flow Rate	4000L/min
	Series	MS
	Connection Thread Standard	G
	Drain Type	Manual
	Filtration Size	40μm
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	+60°C
	Standards/Approvals	RoHS, VDMA24364-B1/B2-L
	Model Number	611737
	Bowl Material	Polycarbonate

	選取全部
	品牌 Festo
	Product Type Filter Regulator
	Port Size 3/8 in G
	Maximum Operating Pressure 20 bar
	Maximum Flow Rate 4000L/min
	Series MS
	Connection Thread Standard G
	Drain Type Manual
	Filtration Size 40μm
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature +60°C
	Standards/Approvals RoHS, VDMA24364-B1/B2-L
	Model Number 611737
	Bowl Material Polycarbonate

COO (Country of Origin):: HU

Festo MS Filter Regulator, 3/8 inches Port Size, 4000L/min Maximum Flow Rate - MS6-LFR-3/8-D7-E-R-M-E11, Numeric Part Number:611737

This filter regulator provides combined Air filtration and pressure regulation for pneumatic systems, designed for industrial automation and machinery environments. It conditions compressed Air by removing particulates down to a fine Micron rating while enabling pressure control suitable for a wide range of tooling and control equipment.

Features and Benefits:

• 40μm filtration protects downstream valves and actuators
• 4000 L/min maximum flow supports high-demand pneumatic circuits
• 20 bar maximum operating pressure enables robust system tolerance
• Polycarbonate bowl gives Visual fluid level monitoring
• Manual drain allows controlled condensate removal during maintenance
• Operates between -10°C and +60°C for varied workplace climates

Applications

• Suitable for factory automation Air preparation stages
• Ideal for feeding control valves and cylinders in production lines
• Used with pneumatic test rigs requiring high flow capacity
• Can be used for compressed Air conditioning in assembly stations
• Used for secondary filtration on equipment with sensitive components

What connection Interface is provided for instalment into piping?

It uses a 3/8 in G threaded port compatible with standard G-thread pneumatic fittings.

How does the unit comply with industrial material restrictions?

The construction conforms to RoHS requirements for restricted substances and follows VDMA24364-B1/B2-L guidelines for pneumatic device design.

What benefit does the bowl material offer during inspections?

The transparent polycarbonate bowl permits quick Visual checks of trapped contaminants and condensate without disassembly.

Can this device perform in elevated-temperature environments?

Yes, the operational range extends up to +60°C, allowing use near warm equipment within specified limits.