Festo 1/2 in FRL Assembly, Manual Drain, 40 μm Filtration Size Integrated Pressure Gauge, 530222

RS庫存編號:: 288-2819
製造零件編號:: MSB6-1/2:J1D1A1-WP
製造商:: Festo

Festo 1/2 in FRL Assembly, Manual Drain, 40 μm Filtration Size Integrated Pressure Gauge, 530222

小計（1 件）*

TWD14,720.00

(不含稅)

TWD15,456.00

訂單超過 $1,300.00 免費送貨

製造商存貨

準備從 2026年10月08日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD14,720.00

* 參考價格

RS庫存編號:: 288-2819
製造零件編號:: MSB6-1/2:J1D1A1-WP
製造商:: Festo

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Festo
	Product Type	FRL Assembly
	Port Size	1/2 in
	Integrated Pressure Gauge	Yes
	Maximum Flow Rate	3100L/min
	Connection Thread Standard	G
	Drain Type	Manual
	Series	MS
	Filtration Size	40μm
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	60°C
	Maximum Operating Pressure	18 bar
	Standards/Approvals	RoHS
	Bowl Material	Polycarbonate
	Model Number	530222

	選取全部
	品牌 Festo
	Product Type FRL Assembly
	Port Size 1/2 in
	Integrated Pressure Gauge Yes
	Maximum Flow Rate 3100L/min
	Connection Thread Standard G
	Drain Type Manual
	Series MS
	Filtration Size 40μm
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 60°C
	Maximum Operating Pressure 18 bar
	Standards/Approvals RoHS
	Bowl Material Polycarbonate
	Model Number 530222

COO (Country of Origin):: HU

Festo MS FRL Assembly, 1/2 Port Size, 18 Bar Maximum Operating Pressure - MSB6-1/2:J1D1A1-WP, Numeric Part Number:530222

This FRL assembly conditions compressed Air for industrial pneumatic systems by combining filtration, pressure regulation and lubrication into a single unit. It is designed for integration into control and automation equipment where treated Air is required to maintain actuator and valve performance. The assembly accepts G-thread connections and is suited to systems operating across typical workshop temperatures.

Features and Benefits:

• 3100 L/min maximum flow supports high-demand pneumatic circuits
• 18 bar maximum pressure enables robust system headroom
• 40 μm filtration removes fine particulates to protect downstream components
• Polycarbonate bowl permits Visual fluid and condensate inspection
• Integrated pressure gauge gives immediate system pressure feedback
• Manual drain provides simple condensate evacuation without tools

Applications

• Suitable for upstream Air treatment on industrial automation lines
• Ideal for pneumatic supply to valves and cylinders in assembly plants
• Used with high-flow blow-off and actuated tooling systems
• Can be used for compressed Air preparation in test rigs and labs

What temperature range can it withstand in continuous service?

The unit is rated to operate between -10°C and 60°C, permitting use in typical indoor and sheltered industrial environments.

How is the unit connected into existing pneumatic piping?

It uses G-standard threaded ports with a 1/2 in port size for direct screw-in installation to compatible fittings.

What particulate size will the filter capture and how does that affect maintenance?

The filter element captures particles down to 40 μm, reducing wear on valves and actuators and extending service intervals for downstream components.

Does the assembly include Visual indication of pressure without additional instrumentation?

Yes, the built-in pressure gauge provides on-unit pressure readout so operators can verify supply pressure at a glance.