The interior temperature of an enclosure can be reduced by channelling cooler filtered outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents formation of localised hot pockets in installations and protects electronic components from overheating. The Filter Fan Plus series uses a new air flap-outlet technology for the air outlet and thus reaches a high degree of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. Depending on the application there are two systems that are available - the FPI or FPO system. The FPI system is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is fed into the enclosure (airflow direction "In"). This system consists of a filter fan and exit filter. Whereas in the FPO system, the filter fan is located in the upper area of the enclosure to avoid heat buildups (airflow direction "Out"). The FPO system is composed of an intake filter and exit filter fan.
屬性
值
Unimpeded Air Flow
1010m³/h
Noise Level
70dB(A)
Filtered Air Flow
599m³/h
Input Current
700mA
Input Power Rating
140W
AC or DC Operation
AC
Face Dimensions
291 x 291mm
Installation Depth
160mm
Supply Voltage
230 V ac
Face Height
291mm
Face Width
291mm
IP Rating
IP54
Series
FPI/FPO 018
Special Features
Easy Mounting, New Air Flap Outlet Technology for High Airflow, One Filter Mat, Ratchet Mechanism is Used for Mounting and Provides High Stability and Tightness