Broadcom AFBR-1634Z 50 Mbps Fibre Optic Transmitter, Square 685 nm Versatile Link Connector 18.9 mm 12.2mm, 18.1 mm

此圖片僅供參考,請參閲產品詳細資訊及規格

可享批量折扣
查看批量定價選項

小計(1 件)*

TWD774.00

(不含稅)

TWD812.70

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 4 件準備發貨
  • 加上 4 件準備從其他倉庫發貨
  • 加上 320 件從 2026年10月06日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位
每單位
1 - 49TWD774.00
50 - 99TWD754.00
100 +TWD743.00

* 參考價格

包裝方式:
RS庫存編號:
830-5066
製造零件編號:
AFBR-1634Z
製造商:
Broadcom
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Broadcom

Product Type

Fibre Optic Transmitter

Maximum Data Rate

50Mbps

Connector Shape

Square

Wavelength of Peak Sensitivity

685nm

Typical Rise Time

5ns

Typical Fall Time

5ns

Mount Type

Through Hole

Number of Pins

4

Connector Type

Versatile Link

Maximum Data Transmission Distance

200m

Width

12.2mm

Standards/Approvals

RoHS

Length

18.1mm

Height

18.9mm

Series

Versatile Link

Forward Voltage

6V

Broadcom Versatile Link Series Fibre Optic Transmitter, 50Mbps Maximum Data Rate, 200m Maximum Data Transmission Distance - AFBR-1634Z


This Fibre optic transmitter converts electrical signals into optical output for short-range data links in industrial settings. It is designed for through-hole mounting and connects via a square Versatile Link connector to provide point-to-point optical transmission where Compact size and low-voltage operation are required.

Features and Benefits:


• 50Mbps data rate supports moderate-speed serial communications
• 200m maximum transmission distance extends local link reach
• 685nm Peak sensitivity enables matched receiver responsiveness
• 5ns rise and fall times allow fast signal edge fidelity
• 4-pin configuration simplifies straightforward electrical interfacing
• 6V forward voltage reduces supply requirements for integration

Applications


• Suitable for industrial Fibre optic link 200m runs
• Ideal for control-network segments requiring 50Mbps throughput
• Used with square connector Fibre optic module panels
• Can be used for sensor-to-controller optical isolation tasks
• Used for Compact 18.1mm Fibre optic module installations

What mounting method is used for PCB integration?


It uses a through-hole mount style suitable for conventional soldering and mechanical support.

How does the connector form factor affect panel design?


The square connector shape provides predictable mating orientation and simplifies panel cut-out alignment.

Which electrical input does it require to operate correctly?


The device needs a low-voltage supply with a forward voltage around 6V for correct optical emission.

What signal performance can be expected for Pulse transmission?


Typical rise and fall times are 5ns each, supporting Rapid Pulse transitions for timing-sensitive links.

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。