Broadcom Fibre Optic Transceiver, ST Connector, 100 Mbps 1380 nm 20-Pin
- RS庫存編號:
- 229-9748
- 製造零件編號:
- AFBR-5823TQZ
- 製造商:
- Broadcom
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 托盤，共 50 件）*
TWD115,555.00
(不含稅)
TWD121,333.00
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 50 個，準備發貨
單位 | 每單位 | 每托盤* |
|---|---|---|
| 50 - 50 | TWD2,311.10 | TWD115,555.00 |
| 100 + | TWD2,264.90 | TWD113,245.00 |
* 參考價格
- RS庫存編號:
- 229-9748
- 製造零件編號:
- AFBR-5823TQZ
- 製造商:
- Broadcom
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Broadcom | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Fibre Optic Transceiver | |
| Connector Shape | Round | |
| Transmitter Typical Rise Time | 3ns | |
| Transmitter Typical Fall Time | 3ns | |
| Receiver Jitter at Maximum Data Rate | 2.14ns | |
| Number of Pins | 20 | |
| Mount Type | Through Hole | |
| Connector Type | ST | |
| Transmitter Jitter at Maximum Data | 0.6ns | |
| Wavelength of Peak Sensitivity | 1380nm | |
| Length | 39.6mm | |
| Width | 25.4mm | |
| Standards/Approvals | UL, RoHS | |
| Height | 10.2mm | |
| Output Signal Type | PECL | |
| Series | AFBR | |
| 選取全部 | ||
|---|---|---|
品牌 Broadcom | ||
Maximum Data Rate 100Mbps | ||
Product Type Fibre Optic Transceiver | ||
Connector Shape Round | ||
Transmitter Typical Rise Time 3ns | ||
Transmitter Typical Fall Time 3ns | ||
Receiver Jitter at Maximum Data Rate 2.14ns | ||
Number of Pins 20 | ||
Mount Type Through Hole | ||
Connector Type ST | ||
Transmitter Jitter at Maximum Data 0.6ns | ||
Wavelength of Peak Sensitivity 1380nm | ||
Length 39.6mm | ||
Width 25.4mm | ||
Standards/Approvals UL, RoHS | ||
Height 10.2mm | ||
Output Signal Type PECL | ||
Series AFBR | ||
- COO (Country of Origin):
- PH
The Broadcom AFBR-58x3xxZ series 125-MBd Fast Ethernet Transceiver provide the system designer with products to implement a range of 125-MBd Fast Ethernet and FDDI as well as 100-Mb/s Asynchronous Transfer Mode (ATM) designs. It is compatible to SFF-8472 (digital diagnostic interface for optical transceivers). Using the 2-wire serial interface, the transceivers provide real-time information on temperature, bias current, LED average output power, and receiver average input power. The interface also adds the ability to monitor the Receiver Loss of Signal (Rx_LOS). It is supplied in industry standard 2 x 9 transceiver package and has ST connector.
Full compatibility with 100BASE-FX version IEEE802.3u
Full compatibility with FDDI
DCPECL differential input and output data connections
DCPECL signal detect output
Industrial temperature range between -40°C and 85°C
Wave solder and aqueous wash process compatible
相關連結
- Broadcom AFBR-5823TQZ Fibre Optic Transceiver 100 Mbps 1380 nm 20-Pin
- Broadcom Fibre Optic Transceiver 100 Mbps 1380 nm 9-Pin
- Broadcom Fibre Optic Transceiver 125 Mbps 1380 nm 9-Pin
- Broadcom Fibre Optic Transceiver 100 Mbps 1380 nm 20-Pin
- Broadcom AFBR-5803ATZ Fibre Optic Transceiver 100 Mbps 1380 nm 9-Pin
- Broadcom AFBR-5803TZ Fibre Optic Transceiver 100 Mbps 1380 nm 9-Pin
- Broadcom AFBR-5803ATQZ Fibre Optic Transceiver 125 Mbps 1380 nm 9-Pin
- Broadcom AFBR-5813TQZ Fibre Optic Transceiver 100 Mbps 1380 nm 20-Pin