Broadcom SP000063855 5 MBd 700 nm Fibre Optic Receiver, Round, Push In Collet Connector

此圖片僅供參考,請參閲產品詳細資訊及規格

可享批量折扣
查看批量定價選項

小計(1 件)*

TWD694.00

(不含稅)

TWD728.70

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 307 件準備從其他地點送貨
  • 加上 25 件從 2026年10月07日 起發貨
  • 加上 375 件從 2026年10月26日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位
每單位
1 - 31TWD694.00
32 - 62TWD676.00
63 +TWD668.00

* 參考價格

包裝方式:
RS庫存編號:
696-1844
製造零件編號:
SP000063855
製造商:
Broadcom
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Broadcom

Maximum Data Rate

5MBd

Product Type

Fibre Optic Receiver

Connector Shape

Round

Wavelength of Peak Sensitivity

700nm

Typical Rise Time

14ns

Typical Fall Time

4ns

Number of Pins

5

Mount Type

Through Hole

Connector Type

Push In Collet

Width

9.2mm

Standards/Approvals

No

Length

24.2mm

Height

9mm

Series

SFH

Output Signal Type

TTL

Broadcom SFH Series Fibre Optic Receiver, 24.2mm Length, 5 Pins - SP000063855


This Fibre optic receiver converts optical signals into TTL electrical outputs for use in electronic assemblies. It is intended for through-hole mounting and is suitable where a Compact optical-to-digital Interface is required. The device is optimised for operation around a visible near-red Wavelength and supports moderate data-rate transmission for control and detection tasks.

Features and Benefits:


• TTL output simplifies direct digital interfacing
• Peak sensitivity at 700nm for near-red detection
• Typical rise time 14ns for Rapid signal acquisition
• Typical fall time 4ns for fast signal clearance
• Maximum data rate 5MBd for moderate-speed links
• Five-pin configuration enables straightforward connectivity

Applications


• Suitable for inline optical-to-digital sensor modules
• Ideal for control signalling in automation systems
• Used with optical transmitters operating near 700nm
• Can be used for short-range serial optical links
• Suitable for PCB-mounted detection in equipment panels

What mounting method does it require?


It is designed for through-hole mounting to secure it to a PCB.

How is the optical Fibre attached?


A round connector with a push-in collet secures the Fibre end for alignment.

How many electrical connections are provided?


The device uses a five-pin electrical Interface for power and signal lines.

What output logic level should the receiving circuit expect?


The detector produces a TTL-compatible digital output signal.

Which physical profile may assist low-height installations?


The receiver presents a low-profile height suitable for constrained vertical spaces.

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。