Murata Ferrite Bead 0.8 mm (Surface) (1206) (Inductor Type), 220 Ω impedance at 100 MHz
- RS庫存編號:
- 104-8512P
- 製造零件編號:
- BLA31BD221SN4D
- 製造商:
- Murata
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計 1000 件 (以卷裝提供)*
TWD20,600.00
(不含稅)
TWD21,630.00
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 1,080 個，準備發貨
單位 | 每單位 |
|---|---|
| 1000 - 1990 | TWD20.60 |
| 2000 + | TWD19.90 |
* 參考價格
- RS庫存編號:
- 104-8512P
- 製造零件編號:
- BLA31BD221SN4D
- 製造商:
- Murata
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Murata | |
| Product Type | Ferrite Bead | |
| Package Type | 1206 | |
| Impedance at 100 MHz | 220Ω | |
| Packaging | Tape & Reel | |
| Current Rating | 150mA | |
| Mount Type | Surface | |
| Sub Type | Inductor Type | |
| Minimum Operating Temperature | -55°C | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 125°C | |
| Length | 3.2mm | |
| Standards/Approvals | REACH, RoHS | |
| Maximum DC Resistance | 0.35Ω | |
| Height | 0.8mm | |
| Depth | 1.6mm | |
| Material | Ferrite | |
| Series | BLA31B | |
| Application | General Purpose | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Murata | ||
Product Type Ferrite Bead | ||
Package Type 1206 | ||
Impedance at 100 MHz 220Ω | ||
Packaging Tape & Reel | ||
Current Rating 150mA | ||
Mount Type Surface | ||
Sub Type Inductor Type | ||
Minimum Operating Temperature -55°C | ||
Pin Count 8 | ||
Maximum Operating Temperature 125°C | ||
Length 3.2mm | ||
Standards/Approvals REACH, RoHS | ||
Maximum DC Resistance 0.35Ω | ||
Height 0.8mm | ||
Depth 1.6mm | ||
Material Ferrite | ||
Series BLA31B | ||
Application General Purpose | ||
Automotive Standard No | ||
- COO (Country of Origin):
- JP
Murata 1206 BLA31A/B Series Chip Bead Inductor array
BLA31A/B series are high performance EMI filters constructed from four circuits of ferrite beads. The BLA31A/B series is suitable for EMI suppression in small digital equipment. Two types of impedance characteristics are available within this series, and these ferrite beads offer a broad frequency range of attenuation. A nickel barrier structure of external electrodes enables excellent solder heat resistance. This series is Ideal for high density mounting and reflow or flow soldering can be used. These ferrite beads are suitable for general use.
SMT 1206 Inductors (Chokes)
相關連結
- EOZ Push Button Switch Panel Mount SPST 250V ac, IP65
- Festo Compressed Air Pipe Blue Polyurethane 6mm x 50m PUN Series, 159664
- Vishay LH1511BT Series Solid State Relay PCB Mount, 200 V ac/dc Load
- Portescap Brushless DC Motor 15 V dc 9300 rpm, 3mm Shaft Diameter
- Amphenol Industrial Pin Contacts Screw
- Fluke 179 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- Honeywell Amplified Airflow Sensor AWM3000 Series
- Jumo diraTRON Panel Mount PID Temperature Controller 3 Output 2 Relay 110 → 240 V