Microchip, 28-Pin SOIC, Ethernet Controller, 3.3 V Serial-SPI 3.6V ENC28J60-I/SO, Full Duplex/Half Duplex
- RS庫存編號:
- 698-8987P
- 製造零件編號:
- ENC28J60-I/SO
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
享受批量購買折扣
查看批量定價選項小計 7 件 (以管提供)*
TWD903.00
(不含稅)
TWD948.15
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2,162 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 節省 |
|---|---|---|
| 7 + | TWD129.00 | - |
* 參考價格
- RS庫存編號:
- 698-8987P
- 製造零件編號:
- ENC28J60-I/SO
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Product Type | Ethernet Controller | |
| Sub Type | Ethernet Controller | |
| Communication Mode | Full Duplex/Half Duplex | |
| Number of Ports | 1 | |
| Standard Supported | IEEE 802.3 | |
| Interface Type | Serial-SPI | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 28 | |
| Maximum Supply Voltage | 3.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS | |
| Length | 6mm | |
| Height | 1mm | |
| Minimum Supply Voltage | 3.3V | |
| Width | 6mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Product Type Ethernet Controller | ||
Sub Type Ethernet Controller | ||
Communication Mode Full Duplex/Half Duplex | ||
Number of Ports 1 | ||
Standard Supported IEEE 802.3 | ||
Interface Type Serial-SPI | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 28 | ||
Maximum Supply Voltage 3.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS | ||
Length 6mm | ||
Height 1mm | ||
Minimum Supply Voltage 3.3V | ||
Width 6mm | ||
Automotive Standard No | ||
ECN28J60 10Base-T Ethernet Controllers
The ENC28J60 from Microchip is a great stand-alone ethernet controller. ENC28J60 is a 10BASE-T controller in a small form factor SOIC package with 28 pins. Featuring bandwidth of 10Mbps and onboard MAC & PHY, this controller is great for a range of applications. Microchips ethernet controllers also contain internal DMA for faster memory copying and a max speed of 25Mhz.
Features and Benefits:
Applications:
PHY and MAC?
PHY stand for 'Physical layer'. A physical layer is the first layer in an OSI stack. PHY layer will define physical and electrical characteristics of the network.
MAC is the abbreviation for 'Medium Access Control' and is the second layer in the OSI stack. The MAC is responsible for sending and receiving RF frames.
Daughter boards
Ethernet Communications - Microchip
相關連結
- EOZ Push Button Switch Panel Mount SPST 250V ac, IP65
- Portescap Brushless DC Motor 15 V dc 9300 rpm, 3mm Shaft Diameter
- Festo Compressed Air Pipe Blue Polyurethane 6mm x 50m PUN Series, 159664
- Fluke 179 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- Vishay LH1511BT Series Solid State Relay PCB Mount, 200 V ac/dc Load
- Jumo diraTRON Panel Mount PID Temperature Controller 3 Output 2 Relay 110 → 240 V
- Amphenol Industrial Pin Contacts Screw
- Honeywell Amplified Airflow Sensor AWM3000 Series