Microchip KSZ8091RNBCA, Ethernet Transceiver, 3.3 V 100 Mbps RMII, 32-Pin 3.3 V QFN
- RS庫存編號:
- 177-3924
- 製造零件編號:
- KSZ8091RNBCA
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 5 件）*
TWD294.00
(不含稅)
TWD308.70
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年5月07日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 5 - 120 | TWD58.80 | TWD294.00 |
| 125 + | TWD57.20 | TWD286.00 |
* 參考價格
- RS庫存編號:
- 177-3924
- 製造零件編號:
- KSZ8091RNBCA
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Ethernet Transceiver | |
| Sub Type | PHY | |
| Communication Mode | 10Base-T, 100Base-TX | |
| Standard Supported | IEEE 802.3 | |
| Interface Type | RMII | |
| Mount Type | Surface Mount | |
| Package Type | QFN | |
| Maximum Supply Voltage | 3.3V | |
| Pin Count | 32 | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 70°C | |
| Height | 4mm | |
| Standards/Approvals | Lead-Free | |
| Length | 4mm | |
| Width | 4 mm | |
| Minimum Supply Voltage | 3.3V | |
| Automotive Standard | No | |
| Supply Current | 47mA | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Maximum Data Rate 100Mbps | ||
Product Type Ethernet Transceiver | ||
Sub Type PHY | ||
Communication Mode 10Base-T, 100Base-TX | ||
Standard Supported IEEE 802.3 | ||
Interface Type RMII | ||
Mount Type Surface Mount | ||
Package Type QFN | ||
Maximum Supply Voltage 3.3V | ||
Pin Count 32 | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 70°C | ||
Height 4mm | ||
Standards/Approvals Lead-Free | ||
Length 4mm | ||
Width 4 mm | ||
Minimum Supply Voltage 3.3V | ||
Automotive Standard No | ||
Supply Current 47mA | ||
- COO (Country of Origin):
- US
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable.
Single-chip 10Base-T/100Base-TX Ethernet transceiver
MII Interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management Interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed
相關連結
- Microchip KSZ8091RNBCA 3.3 V 100 Mbps RMII, 32-Pin 3.3 V QFN
- Microchip KSZ8061RNBW 3.3 V 100 Mbps RMII, 32-Pin 3.3 V QFN
- Microchip KSZ8061RNDW 3.3 V 100 Mbps RMII, 32-Pin 3.3 V QFN
- Microchip KSZ8081RNACA-TR 3.3 V 100 Mbps RMII, 24-Pin 3.3 V QFN
- Microchip KSZ8081RNAIA-TR 3.3 V 100 Mbps RMII, 24-Pin 3.3 V QFN
- Microchip KSZ8081MNXIA-TR 3.3 V 100 Mbps MII 32-Pin 3.3 V QFN
- Microchip KSZ8041NL-TR 3.3 V 100 Mbps MII 32-Pin 3.3 V QFN
- Microchip KSZ8081RNBCA-TR 3.3 V 100 Mbps MII 32-Pin 3.3 V QFN