Microchip KSZ9031RNXIC, Ethernet Transceiver, 3.3 V RGMII, 48-Pin 3.3 V QFN

RS庫存編號:: 177-3549
製造零件編號:: KSZ9031RNXIC
製造商:: Microchip

Microchip KSZ9031RNXIC, Ethernet Transceiver, 3.3 V RGMII, 48-Pin 3.3 V QFN

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 托盤，共 260 件）*

TWD29,094.00

(不含稅)

TWD30,550.00

訂單超過 $1,300.00 免費送貨

暫時缺貨

520 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位	每托盤*
260 - 1040	TWD111.90	TWD29,094.00
1300 +	TWD109.60	TWD28,496.00

* 參考價格

RS庫存編號:: 177-3549
製造零件編號:: KSZ9031RNXIC
製造商:: Microchip

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Microchip
	Product Type	Ethernet Transceiver
	Communication Mode	Full Duplex/Half Duplex
	Loopback Mode	Internal
	Standard Supported	10BASE-T, IEEE 802.3, 100BASE-TX, 1000BASE-T
	Interface Type	RGMII
	Mount Type	Surface Mount
	Package Type	QFN
	Pin Count	48
	Maximum Supply Voltage	3.3V
	Minimum Operating Temperature	85°C
	Maximum Operating Temperature	-40°C
	Width	7 mm
	Length	7mm
	Standards/Approvals	No
	Height	0.8mm
	Minimum Supply Voltage	3.3V
	Automotive Standard	AEC-Q100
	Supply Current	210mA

	選取全部
	品牌 Microchip
	Product Type Ethernet Transceiver
	Communication Mode Full Duplex/Half Duplex
	Loopback Mode Internal
	Standard Supported 10BASE-T, IEEE 802.3, 100BASE-TX, 1000BASE-T
	Interface Type RGMII
	Mount Type Surface Mount
	Package Type QFN
	Pin Count 48
	Maximum Supply Voltage 3.3V
	Minimum Operating Temperature 85°C
	Maximum Operating Temperature -40°C
	Width 7 mm
	Length 7mm
	Standards/Approvals No
	Height 0.8mm
	Minimum Supply Voltage 3.3V
	Automotive Standard AEC-Q100
	Supply Current 210mA

Datasheet

COO (Country of Origin):: US

The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.

Single-chip 10/100/1000Mbps Ethernet transceiver

KSZ9031Mxx feature GMII/MII standard Interface with 3.3V/2.5V/1.8V tolerant I/Os

KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths

GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os

Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)

On-chip termination resistors for the differential pairs

On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core

Jumbo frame support up to 16KB

125MHz Reference Clock Output

Energy-detect power-down mode

Microchip KSZ9031RNXIC, Ethernet Transceiver, 3.3 V RGMII, 48-Pin 3.3 V QFN

訂單超過 $1,300.00 免費送貨

相關連結