Microchip KSZ8081MLXIA, Ethernet Transceiver, 3.3 V 100 Mbps RMII v1.2, 48-Pin 3.3V LQFP
- RS庫存編號:
- 177-3528
- 製造零件編號:
- KSZ8081MLXIA
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 托盤，共 250 件）*
TWD13,000.00
(不含稅)
TWD13,650.00
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 | 每托盤* |
|---|---|---|
| 250 - 1000 | TWD52.00 | TWD13,000.00 |
| 1250 + | TWD51.00 | TWD12,750.00 |
* 參考價格
- RS庫存編號:
- 177-3528
- 製造零件編號:
- KSZ8081MLXIA
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Product Type | Ethernet Transceiver | |
| Maximum Data Rate | 100Mbps | |
| Sub Type | Transceiver | |
| Communication Mode | 10Base-T, 100Base-TX | |
| Interface Type | RMII v1.2 | |
| Standard Supported | IEEE 802.3 | |
| Mount Type | Surface Mount | |
| Package Type | LQFP | |
| Pin Count | 48 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 7.1mm | |
| Width | 4mm | |
| Standards/Approvals | RoHS | |
| Minimum Supply Voltage | 3.3V | |
| Height | 1.6mm | |
| Supply Current | 41mA | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Product Type Ethernet Transceiver | ||
Maximum Data Rate 100Mbps | ||
Sub Type Transceiver | ||
Communication Mode 10Base-T, 100Base-TX | ||
Interface Type RMII v1.2 | ||
Standard Supported IEEE 802.3 | ||
Mount Type Surface Mount | ||
Package Type LQFP | ||
Pin Count 48 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 7.1mm | ||
Width 4mm | ||
Standards/Approvals RoHS | ||
Minimum Supply Voltage 3.3V | ||
Height 1.6mm | ||
Supply Current 41mA | ||
Automotive Standard No | ||
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable.
Single-chip 10Base-T/100Base-TX Ethernet transceiver
MII Interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management Interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed
相關連結
- Microchip KSZ8081MLXIA 3.3 V 100 Mbps RMII v1.2, 48-Pin 3.3V LQFP
- Texas Instruments DP83848IVV/NOPB 3.3 V 100 Mbps RMII, 48-Pin 3.3V LQFP
- Texas Instruments DP83848CVV/NOPB 3.3 V 100 Mbps RMII, 48-Pin 3.3V LQFP
- Microchip KSZ8081MLXIA-TR 3.3 V 100 Mbps, 48-Pin 3.3 V LQFP
- Microchip KSZ8081RNDCA-TR 1.8 V 100 Mbps RMII v1.2, 24-Pin 3.3V QFN
- Microchip KSZ8721BL-TR 3.3 V 100 Mbps RMII 48-Pin 3.3V LQFP
- Microchip KSZ8091RNBCA 3.3 V 100 Mbps RMII, 32-Pin 3.3V QFN
- Microchip KSZ8721BLI 2.5 V 100 Mbps RMII 48-Pin 3.3V LQFP