可享批量折扣
小計（1 件）*
TWD487.00
(不含稅)
TWD511.35
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 344 件準備從其他地點送貨
- 加上 240 件從 2026年3月17日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 19 | TWD487.00 |
| 20 - 99 | TWD479.00 |
| 100 + | TWD394.00 |
* 參考價格
- RS庫存編號:
- 552-898
- 製造商:
- RS PRO
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | RS PRO | |
| Product Type | ESD Grounding Cord | |
| EN 61340-5-1 Compliant | Yes | |
| Cord Length | 1.8m | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 RS PRO | ||
Product Type ESD Grounding Cord | ||
EN 61340-5-1 Compliant Yes | ||
Cord Length 1.8m | ||
Standards/Approvals No | ||
豁免
RS PRO Coiled Cords
In every ESD (electrostatic discharge) environment grounding is essential for blocking ESD. This coiled cord from our own RS PRO brand will safely direct static electricity to the ground. This will protect workers and equipment in an environment where sensitive electronic equipment is used, manufactured, assembled or repaired.
Features and Benefits
• High visibility - bright colours allow the supervisor to see that worker is wearing a wrist strap
• Eliminates intermittent failures that occur with less durable single and dual wire cords
• Rapid retraction strength polyurethane coil cord which provides high memory and less coil cord dragging on the work surface
• Relaxed retraction - will not interfere with your movements
• Improved snap design - stronger strain relief and snap retention for long life; low profile keeps the cord from being disconnected
• High-quality long-life yellow coil cord
• Integral 1MΩ, 2MΩ or 4MΩ resistor
• Soft polyurethane strain relief
Always remember!
• Test the ground before you use it
• Keep a room clean
• Test the wrist strap - best to test the strap is while it is worn
• Each individual workstation must be individually grounded to the ground bus or to the nearest equipment ground
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.
Note
Wrist bands and cords must be ordered separately.
Standards
Supports ESD S20.20 and EN 61340-5-1 ESD control programme compliance
相關連結
- RS PRO ESD Grounding Cord With 10 mm Socket
- Notrax ESD Grounding Cord With 10 mm Socket
- RS PRO ESD Grounding Wrist Strap & Cord Set With 10 mm Socket, 10 mm Stud
- RS PRO ESD Grounding Cord With 10 mm Stud
- SCS ESD Grounding Cord With 10 mm Snap
- Notrax ESD Grounding Cord With 10 mm Female
- Licefa ESD Grounding Cord With 10 mm Stud
- SCS ESD Grounding Cord With 10 mm Stud