透過選取一個或多個屬性來查找類似產品。

ABS Eurocard compatible case, Ultramas19 Series

Four Eurocard compatible cases made of light grey ABS plastic, 3 HU or 6 HU high, with or without ventilation. The cases can be set up to be free-standing or stacked (front and back panels must be ordered separately). All cases have a width of 9 sub-units (1 sub-unit = 5.08 mm) and accept 160 mm PCB Eurocards with 3 HU or 6 HU. The depth is always 199 mm (exterior dimensions).

Eight screw hole covers are also supplied, and can be fitted on top or on the side to keep the case horizontal and vertical or to allow it to be stacked. Feet/tilt feet for vertical or horizontal set-up are supplied. The 2 mm thick anodised aluminium front and back panels can be slotted into the case and contribute to the overall clean image.

The width of the case can be increased by 9 sub-units using the extension set.

The case can be mounted on a wall using the wall brackets. The case's clearance from the floor can be increased to improve ventilation using the foot kit.

Note

Stock no. 582-906 is RoHS compliant.

單位	每單位
1 - 24	TWD224.00
25 - 99	TWD216.00
100 +	TWD207.00

選取全部	屬性	值
	品牌	Bopla
	Panel Type	Front
	Product Type	Enclosure Panel
	Width	56.3mm
	Height	2mm
	Length	149mm
	Material	Aluminium
	For Use With	Ultramas Enclosures

	選取全部
	品牌 Bopla
	Panel Type Front
	Product Type Enclosure Panel
	Width 56.3mm
	Height 2mm
	Length 149mm
	Material Aluminium
	For Use With Ultramas Enclosures

Bopla Aluminium Front, 2 mm H, 56.3mm W, 149 mm L, for Use with Ultramas Enclosures

訂單超過 $1,300.00 免費送貨

ABS Eurocard compatible case, Ultramas19 Series

Note

相關連結

Bopla Aluminium Front, 2 mm H, 56.3mm W, 149 mm L, for Use with Ultramas Enclosures

訂單超過 $1,300.00 免費送貨

批發價選項

ABS Eurocard compatible case, Ultramas19 Series

Note

相關連結