Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button, Surface, 30 mm Cutout, 1 NO/2 NC, IP65
- RS庫存編號:
- 840-3040
- 製造零件編號:
- SSA-EB1PLXR-12ECQ8
- 製造商:
- Banner
小計（1 件）*
TWD8,168.00
(不含稅)
TWD8,576.40
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 138 件準備從其他地點送貨
- 加上 24 件從 2026年11月23日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD8,168.00 |
* 參考價格
- RS庫存編號:
- 840-3040
- 製造零件編號:
- SSA-EB1PLXR-12ECQ8
- 製造商:
- Banner
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Banner | |
| Mount Type | Surface | |
| Product Type | Emergency Stop Push Button | |
| Cutout Diameter | 30mm | |
| Contact Configuration | 1 NO/2 NC | |
| Housing Material | Polycarbonate, Polyamide | |
| Push Button Actuation | Twist Release | |
| Series | SSA-EB | |
| Illuminated | Yes | |
| IP Rating | IP65 | |
| Colour | Red, Yellow | |
| Terminal Type | M12 Connector | |
| Contact Current | 2A | |
| Contact AC Voltage | 60V ac | |
| Contact DC Voltage | 75V dc | |
| Head Style | Round | |
| Head Diameter | 40mm | |
| Hazardous Area Certification | No | |
| Standards/Approvals | No | |
| Length | 119.8mm | |
| Width | 33mm | |
| Safety Contacts | NC | |
| Push Button Material | Polyamide | |
| 選取全部 | ||
|---|---|---|
品牌 Banner | ||
Mount Type Surface | ||
Product Type Emergency Stop Push Button | ||
Cutout Diameter 30mm | ||
Contact Configuration 1 NO/2 NC | ||
Housing Material Polycarbonate, Polyamide | ||
Push Button Actuation Twist Release | ||
Series SSA-EB | ||
Illuminated Yes | ||
IP Rating IP65 | ||
Colour Red, Yellow | ||
Terminal Type M12 Connector | ||
Contact Current 2A | ||
Contact AC Voltage 60V ac | ||
Contact DC Voltage 75V dc | ||
Head Style Round | ||
Head Diameter 40mm | ||
Hazardous Area Certification No | ||
Standards/Approvals No | ||
Length 119.8mm | ||
Width 33mm | ||
Safety Contacts NC | ||
Push Button Material Polyamide | ||
Banner Emergency Stop Push Button, 2A Current Rating, 40mm Button Head Diameter - SSA-EB Series - SSA-EB1PLXR-12ECQ8
Halt equipment in its tracks with this emergency stop push button from Banner. It cuts the power to a machine immediately when pressed, helping to prevent equipment damage and injuries. As it has an IP65 rating, this unit is fully protected against dust and low-pressure water jets, so it stays strong in tough industrial environments. Its bright red and yellow housing means it catches your eye in busy workspaces. Thanks to its latching mechanism, the push button stays down until you reset it, so faulty kit can't accidentally power up.
• Simple twist-release actuator for quick resets
• Contact block opens NC contacts automatically if the actuator disconnects to stop damage from assembly faults
• Large push button head diameter of 40mm makes it a cinch to press
• M12 quick-disconnect port for ease of use
Applications
• Industrial automation
• Packaging industry
• Heavy engineering
How can I tell that this emergency stop push button is activated?
The device's actuator lights up when it disconnects your equipment, so you can tell if it's active in a flash.
相關連結
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 1 NC, IP65
- Banner SSA-EB Series Pull/Twist to Release Illuminated Emergency Stop Push Button Threaded Mount, 30 mm
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 30 mm Cutout IP65 IP67
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button NC, IP65
- Banner SSA-EB Series Twist Release Illuminated Emergency Stop Push Button 30 mm Cutout IP65
- Banner SSA-EB Series Pull/Twist to Release Emergency Stop Push Button 14.5 mm Cutout, DPST
- Banner SSA-EB Series Twist Release Emergency Stop Push Button 30 mm Cutout IP67, IP65