Omron A22NE Series Twist Release Emergency Stop Push Button, Panel Mount, 22 mm Cutout, 1 NC, IP65

RS庫存編號:: 215-7703
Distrelec 貨號:: 301-36-696
製造零件編號:: A22NE-M-P002-N
製造商:: Omron

Omron A22NE Series Twist Release Emergency Stop Push Button, Panel Mount, 22 mm Cutout, 1 NC, IP65

小計（1 件）*

TWD1,783.00

(不含稅)

TWD1,872.15

訂單超過 $1,300.00 免費送貨

有庫存

2 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD1,783.00

* 參考價格

RS庫存編號:: 215-7703
Distrelec 貨號:: 301-36-696
製造零件編號:: A22NE-M-P002-N
製造商:: Omron

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Omron
	Mount Type	Panel Mount
	Product Type	Emergency Stop Push Button
	Cutout Diameter	22mm
	Contact Configuration	1 NC
	Push Button Actuation	Twist Release
	Series	A22NE
	Illuminated	No
	IP Rating	IP65
	Colour	Red
	Head Style	Round
	Hazardous Area Certification	No
	Standards/Approvals	No

	選取全部
	品牌 Omron
	Mount Type Panel Mount
	Product Type Emergency Stop Push Button
	Cutout Diameter 22mm
	Contact Configuration 1 NC
	Push Button Actuation Twist Release
	Series A22NE
	Illuminated No
	IP Rating IP65
	Colour Red
	Head Style Round
	Hazardous Area Certification No
	Standards/Approvals No

登入下載 CAD 模型

Omron A22NE Series Emergency Stop Push Button, IP65 Ingress Protection, Panel Mount Type - A22NE-M-P002-N

This emergency stop push button is a red, round control designed to provide a rapid mechanical disconnect for machinery and equipment. It is intended for panel installation and offers a robust sealed interface suitable for environments where protection from dust and water ingress is required. The device employs a manual twist-to-release action and presents a single normally closed contact to interrupt circuits when actuated.

Features and Benefits:

• IP65 rated housing prevents dust and water ingress
• Panel mount design enables secure dashboard integration
• 22mm cut-out compatibility simplifies retrofit installation
• Single NC contact ensures circuit interruption on activation
• Twist-release actuation delivers positive manual reset control

Applications

• Suitable for industrial control panels requiring operator E‑stop
• Ideal for machinery safety stations in wet areas
• Used with automated conveyors needing accessible shut-off
• Can be used for retrofit safety upgrades on control cabinets

What mounting preparation does it require?

It fits a 22mm panel hole and secures from the front for straightforward installation into standard control panels.

How is the device reset after activation?

The actuator must be rotated to release it, mechanically restoring the contact to its normal state.

Is the unit illuminated for visibility in low light?

No, the design does not include any illumination

visibility relies on colour and placement.

Can it be used in hazardous classified zones?

The product has no hazardous area certification and should not be specified for classified locations.