Aim-TTi LDH400 Series Electronic DC Load, 0 to 400 W, 10/500 V, 0 to 16 A

RS庫存編號:: 161-5840
製造零件編號:: LDH400P
製造商:: Aim-TTi

Aim-TTi LDH400 Series Electronic DC Load, 0 to 400 W, 10/500 V, 0 to 16 A

小計（1 件）*

TWD70,272.00

(不含稅)

TWD73,785.60

訂單超過 $1,300.00 免費送貨

有庫存

加上 3 件從 2026年1月26日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD70,272.00

* 參考價格

RS庫存編號:: 161-5840
製造零件編號:: LDH400P
製造商:: Aim-TTi

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Aim-TTi
	Series	LDH400
	Product Type	Electronic DC Load
	Load Type	Programmable
	Constant Voltage Mode Range	10/500 V
	Constant Current Mode Range	0 to 16 A
	Constant Resistance Mode Range	50 to 10000 Ω
	Constant Wattage Mode Range	0 to 400 W
	Interface Type	LAN, RS232, USB, GPIB
	Rack Unit	3U
	Operating Modes	Constant Power, Constant Current, Constant Resistance, Constant Voltage
	Standards/Approvals	No

	選取全部
	品牌 Aim-TTi
	Series LDH400
	Product Type Electronic DC Load
	Load Type Programmable
	Constant Voltage Mode Range 10/500 V
	Constant Current Mode Range 0 to 16 A
	Constant Resistance Mode Range 50 to 10000 Ω
	Constant Wattage Mode Range 0 to 400 W
	Interface Type LAN, RS232, USB, GPIB
	Rack Unit 3U
	Operating Modes Constant Power, Constant Current, Constant Resistance, Constant Voltage
	Standards/Approvals No

COO (Country of Origin):: GB

Aim-TTi LDH400 Series Electronic Dc Load, Programmable Load, 3 U Rack Units - LDH400P

This electronic DC load by Aim-TTi is a versatile tool for testing and characterising a wide range of DC power sources. With features such as constant current, resistance, power, and voltage modes, this load is programmable and rack-mountable, making it ideal for various applications across different industries.

Features & Benefits

• Programmable load with constant current, resistance, and voltage modes

• Wide range of operating modes including CC, CP, CR, CG, and CV

• High power dissipation and resolution for accurate testing

• Built-in transient generator with variable slew rate for versatile testing

• Multiple interfaces including USB, RS-232, GPIB, and LAN for easy connectivity

Applications

• Ideal for testing power supplies, batteries, and solar cells

• Suitable for characterising electronic power supply units

• Can be used for low voltage applications with its low minimum operating voltage

• Versatile enough to offer test solutions from design laboratories to component test areas

Can it be used for testing different types of power sources?

This electronic DC load is suitable for testing a wide variety of DC power sources, making it versatile for different applications.

Will it simplify testing PFCs and mains connected power supplies?

Yes, it simplifies testing PFCs and power supplies by eliminating the need for an isolation transformer.

Is the LD series suitable for repetitive test use?

Yes, the LD series comes with non-volatile memories that store parameters, making it highly suitable for repetitive tests.

Supplied with

Test Bridge Logging and sequencing software

Multi instrument control

Logging to table and graph format

Timed sequence control across all instruments and channels

USB, LAN and RS232 compatible