Phoenix Contact RIF-1-RSC-LDP-12DC/1X21 Series Interface Relay, DIN Rail, 12V dc Coil, SPDT, 4.2mA, 4.5 mA

RS庫存編號:: 174-3563
製造零件編號:: 2908500
製造商:: Phoenix Contact

Phoenix Contact RIF-1-RSC-LDP-12DC/1X21 Series Interface Relay, DIN Rail, 12V dc Coil, SPDT, 4.2mA, 4.5 mA

小計（1 件）*

TWD307.00

(不含稅)

TWD322.35

訂單超過 $1,300.00 免費送貨

正在逐步停售

最終 80 個，準備發貨

單位	每單位
1 +	TWD307.00

* 參考價格

RS庫存編號:: 174-3563
製造零件編號:: 2908500
製造商:: Phoenix Contact

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Phoenix Contact
	Coil Voltage	12V dc
	Product Type	Interface Relay
	Contact Configuration	SPDT
	Mount Type	DIN Rail
	Series	RIF-1-RSC-LDP-12DC/1X21
	Terminal Type	Screw
	Switching Current	10mA
	Switching AC Voltage	250V ac
	Coil Current	4.2, 4.5mA
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	70°C
	Contact Material	Silver Alloy
	Standards/Approvals	IEC 60947-5-1
	Width	75mm
	Height	89mm
	Length	16mm

	選取全部
	品牌 Phoenix Contact
	Coil Voltage 12V dc
	Product Type Interface Relay
	Contact Configuration SPDT
	Mount Type DIN Rail
	Series RIF-1-RSC-LDP-12DC/1X21
	Terminal Type Screw
	Switching Current 10mA
	Switching AC Voltage 250V ac
	Coil Current 4.2, 4.5mA
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 70°C
	Contact Material Silver Alloy
	Standards/Approvals IEC 60947-5-1
	Width 75mm
	Height 89mm
	Length 16mm

登入下載 CAD 模型

COO (Country of Origin):: CN

This time relay RIF-1-RSC-LDP-12DC/1X21 2908500 from Phoenix Contact is the cost-effective alternative to a PLC; with easy configuration and fast wiring.

Features and Benefits

Pre-assembled relay module

Screw connection

Consists of: relay base, power contact relay, plug-in display/interference suppression module, and retaining bracket

Contact type:1 changeover contact

Time-saving potential distribution, thanks to plug-in bridges

Protection against operating errors due to manual operation that is lockable via screwdriver

Quick and error-free connection to the controller via system cabling

Safety

When working on the products and the system, you must always keep the operating instructions and other items of product documentation to hand and follow them strictly.

Demands on the power supply

Only use power supply units that ensure safe isolation between the primary and secondary circuits according to EN 50178.

Applications

You can use the same electromechanical relay module design for both AC and DC switching module.

Electrical isolation

Voltage adjustment of frequently varying voltage levels

Power amplification

Signal multiplication in the case of relay modules with multiple contacts (e.g., for signal confirmations)

Approvals

IECEx, ATEX and Class 1 Zone 2