Tesa 53988 Blue PVC Electrical Tape, 19mm x 25 m

This electrical tape provides insulating protection for electrical systems and components. It combines a PVC backing with a natural rubber adhesive to form a flexible wrap suited to installations where dielectric performance and moderate heat resistance are required. The product is appropriate for routine insulation, colour‑coding and wiring repair tasks within its operating temperature range.

• 7000V breakdown voltage provides robust dielectric protection
• 25N/cm tensile strength resists stretching under load
• 2.5N/cm adhesion strength ensures secure bonding to conductors
• 150μm thickness delivers consistent insulating layer performance
• 90°C maximum operating temperature supports warmer environments

• Suitable for insulating joints and splices in wiring
• Ideal for colour‑coding electrical circuits in panels
• Used with cable harnesses requiring flexible wraps
• Can be used for temporary protective covering during maintenance
• Suitable for general‑purpose wiring repairs on‑site

The tape uses a polyvinyl chloride backing combined with a natural rubber adhesive.

It carries IEC 60454-3-1 approval and has been approved by IMQ, SEMKO and VDE while complying with REACH and RoHS 2.0.

Its measured tensile capacity is 25N/cm, offering resistance to elongation and mechanical stress.

It is supplied in blue with a width of 19mm and a length of 25m.

It is rated to operate up to 90°C and withstands a breakdown voltage of 7000V.