Festo ELGS, 8083471 Electrical Linear Actuator, 0.25m/s, 200 mm
- RS庫存編號:
- 203-9795
- Distrelec 貨號:
- 301-86-888
- 製造零件編號:
- ELGS-BS-KF-45-200-10P-ST-M-H1-PLK-AA
- 製造商:
- Festo
小計（1 件）*
TWD45,058.00
(不含稅)
TWD47,310.90
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年9月24日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD45,058.00 |
* 參考價格
- RS庫存編號:
- 203-9795
- Distrelec 貨號:
- 301-86-888
- 製造零件編號:
- ELGS-BS-KF-45-200-10P-ST-M-H1-PLK-AA
- 製造商:
- Festo
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Festo | |
| Product Type | Electrical Linear Actuator | |
| Stroke Length | 200mm | |
| Maximum Speed | 0.25m/s | |
| Series | ELGS | |
| Motor Technology | Stepper Motor | |
| Duty Cycle | 100% | |
| IP Rating | IP40 | |
| Guide Type | Ball Bearing | |
| Maximum Operating Temperature | 50°C | |
| Standards/Approvals | RoHS | |
| Model Number | 8083471 | |
| 選取全部 | ||
|---|---|---|
品牌 Festo | ||
Product Type Electrical Linear Actuator | ||
Stroke Length 200mm | ||
Maximum Speed 0.25m/s | ||
Series ELGS | ||
Motor Technology Stepper Motor | ||
Duty Cycle 100% | ||
IP Rating IP40 | ||
Guide Type Ball Bearing | ||
Maximum Operating Temperature 50°C | ||
Standards/Approvals RoHS | ||
Model Number 8083471 | ||
- COO (Country of Origin):
- DE
Festo ELGS Series Electrical Linear Actuator, 200mm Stroke Length, 0.25m/s Maximum Speed - ELGS-BS-KF-45-200-10P-ST-M-H1-PLK-AA, Numeric Part Number:8083471
This electrical linear actuator provides electrically driven linear motion for automation and mechanical systems, using a precision screw-driven mechanism coupled to an integrated stepper motor. It is designed for continuous operation in industrial environments where controlled, repeatable linear positioning is required. Protection against dust and incidental contact is provided to suit typical shop-floor conditions.
Features and Benefits:
• 100% duty cycle ensures uninterrupted continuous operation
• Ball bearing guide delivers smooth, low-friction linear travel
• Stepper motor enables precise positional control and repeatability
• 200mm stroke length supports extended travel tasks
• Maximum speed 0.25m/s facilitates moderate velocity motion
• Rated for operation up to 50°C for elevated ambient use
• Ball bearing guide delivers smooth, low-friction linear travel
• Stepper motor enables precise positional control and repeatability
• 200mm stroke length supports extended travel tasks
• Maximum speed 0.25m/s facilitates moderate velocity motion
• Rated for operation up to 50°C for elevated ambient use
Applications
• Suitable for pick-and-place stages in automated assembly
• Ideal for panel positioning in control cabinets
• Used for linear indexing in inspection systems
• Can be used for feed mechanisms in electronic assembly
• Suitable for actuator tasks in laboratory automation
• Ideal for panel positioning in control cabinets
• Used for linear indexing in inspection systems
• Can be used for feed mechanisms in electronic assembly
• Suitable for actuator tasks in laboratory automation
What kind of motor control is required for accurate positioning?
A stepper motor driver with microstepping and current limiting will provide fine resolution and stable holding torque for repeatable moves.
How should the unit be cooled if installed in warm enclosures?
Ensure adequate ventilation or forced-air circulation to maintain ambient temperatures below the 50°C maximum operating limit.
What mounting considerations support long service life?
Rigid mounting to a flat reference surface and alignment of the load path with the bearing guides minimises side loads and wear on the ball-bearing guide system.
Are there special considerations for speed versus torque?
Increasing speed toward the 0.25m/s maximum will reduce available dynamic force
select motor drive current and microstepping to match required acceleration and load.