onsemi CAT25160VI-GT3, 16 kB Serial EEPROM, 40 ns 8-Pin SOIC Serial-SPI
- RS庫存編號:
- 186-9796
- 製造零件編號:
- CAT25160VI-GT3
- 製造商:
- onsemi
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 25 件）*
TWD250.00
(不含稅)
TWD262.50
(含稅)
添加 150 件 件可免費送貨
庫存資訊目前無法查詢
單位 | 每單位 | 每包* |
|---|---|---|
| 25 - 725 | TWD10.00 | TWD250.00 |
| 750 - 1475 | TWD9.80 | TWD245.00 |
| 1500 + | TWD9.60 | TWD240.00 |
* 參考價格
- RS庫存編號:
- 186-9796
- 製造零件編號:
- CAT25160VI-GT3
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Product Type | Serial EEPROM | |
| Memory Size | 16kB | |
| Interface Type | Serial-SPI | |
| Package Type | SOIC | |
| Mount Type | Surface | |
| Pin Count | 8 | |
| Maximum Clock Frequency | 20MHz | |
| Organisation | 2K x 8 bit | |
| Minimum Supply Voltage | 1.8V | |
| Maximum Supply Voltage | 5.5V | |
| Number of Bits per Word | 8 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Length | 5mm | |
| Standards/Approvals | No | |
| Width | 6 mm | |
| Automotive Standard | AEC-Q100 | |
| Number of Words | 2K | |
| Data Retention | 100year | |
| Supply Current | 2mA | |
| Maximum Random Access Time | 40ns | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Product Type Serial EEPROM | ||
Memory Size 16kB | ||
Interface Type Serial-SPI | ||
Package Type SOIC | ||
Mount Type Surface | ||
Pin Count 8 | ||
Maximum Clock Frequency 20MHz | ||
Organisation 2K x 8 bit | ||
Minimum Supply Voltage 1.8V | ||
Maximum Supply Voltage 5.5V | ||
Number of Bits per Word 8 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Length 5mm | ||
Standards/Approvals No | ||
Width 6 mm | ||
Automotive Standard AEC-Q100 | ||
Number of Words 2K | ||
Data Retention 100year | ||
Supply Current 2mA | ||
Maximum Random Access Time 40ns | ||
The CAT25160 are a EEPROM Serial 16-Kb SPI devices internally organized as 2048x8 bits. They feature a 32-byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are a clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the CAT25160 device. These devices feature software and hardware write protection, including partial as well as full array protection.
10 MHz SPI compatible
1.8 V to 5.5 V supply voltage range
SPI modes (0,0 & 1,1)
32-byte page write buffer
Self-timed write cycle
Hardware and software protection
Block write protection - Protect 1/4, 1/2 or all of EEPROM array
Low power CMOS technology
1,000,000 program/erase cycles
100 year data retention
Industrial and Extended temperature range
8 lead PDIP, SOIC, TSSOP and 8-pad TDFN, UDFN packages
Applications
Automotive Systems
Communications Systems
Computer Systems
Consumer Systems
Industrial Systems
相關連結
- onsemi 40 ns 8-Pin SOIC Serial-SPI
- onsemi CAT25640VI-GT3 40 ns 8-Pin SOIC Serial-SPI
- onsemi CAT25320VI-GT3 40 ns 8-Pin SOIC Serial-SPI
- onsemi CAV25640VE-GT3 35 ns 8-Pin SOIC Serial-SPI
- onsemi CAT25128VI-GT3 40 ns 8-Pin SOIC Serial-SPI
- onsemi CAT25256VI-GT3 40 ns 8-Pin SOIC Serial-SPI
- onsemi 40 ns 8-Pin SOIC Serial-SPI
- onsemi 35 ns 8-Pin SOIC Serial-SPI