小計（1 件）*
TWD213.00
(不含稅)
TWD223.65
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1 + | TWD213.00 |
* 參考價格
- RS庫存編號:
- 695-0605
- 製造零件編號:
- A9203.3
- 製造商:
- Dormer
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Dormer | |
| Product Type | Drill Bit | |
| Material | High Speed Cobalt | |
| Number of Flutes | 3 | |
| Flute Type | Helical | |
| Overall Length | 49mm | |
| Shank Type | Cylindrical | |
| Finish | Bright (Uncoated) | |
| Shank Size | 3.3 mm | |
| Drill Point Angle | 130° | |
| Drilling Length | 18mm | |
| Drill Bit Size | 3.3 mm | |
| Cutting Direction | Right | |
| Standards/Approvals | DINSI | |
| 選取全部 | ||
|---|---|---|
品牌 Dormer | ||
Product Type Drill Bit | ||
Material High Speed Cobalt | ||
Number of Flutes 3 | ||
Flute Type Helical | ||
Overall Length 49mm | ||
Shank Type Cylindrical | ||
Finish Bright (Uncoated) | ||
Shank Size 3.3 mm | ||
Drill Point Angle 130° | ||
Drilling Length 18mm | ||
Drill Bit Size 3.3 mm | ||
Cutting Direction Right | ||
Standards/Approvals DINSI | ||
豁免
HSCo Straight Shank Parabolic Flute Stub Drill (A920)
HSCo high performance Jobber length drill for machining deep holes in most materials up to x3 diameter.
Parabolic flute design enables rapid chip evacuation
Allows greater drilling depths without the need for 'pecking'
130° special point geometry for excellent centring capability and reduced thrust requirements
Thicker web design gives increased structural strength resulting in a much lower risk of drill breakage
Manufactured to DIN1897 standards
相關連結
- Dormer High Speed Cobalt, 49 mm Overall 2 mm
- Dormer High Speed Cobalt, 106 mm Overall 3.3 mm
- Dormer High Speed Cobalt, 101 mm Overall 6.5 mm
- Dormer High Speed Cobalt, 109 mm Overall 6.8 mm
- Dormer High Speed Cobalt, 139 mm Overall 5.5 mm
- Dormer High Speed Cobalt, 55 mm Overall 4 mm
- Dormer High Speed Cobalt, 55 mm Overall 4.2 mm
- Dormer High Speed Cobalt, 40 mm Overall 1.5 mm