SEGGER 8.06.08 J-Link Mictor 38 Adapter Adapter for use with 38-pin Mictor Interface, 20-pin 0.1 in J-Link Interface
- RS庫存編號:
- 201-0715
- 製造零件編號:
- 8.06.08 J-Link Mictor 38 Adapter
- 製造商:
- SEGGER
暫時無法供應
抱歉，我們不知道何時會到貨。
- RS庫存編號:
- 201-0715
- 製造零件編號:
- 8.06.08 J-Link Mictor 38 Adapter
- 製造商:
- SEGGER
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SEGGER | |
| Accessory Type | Adapter | |
| Product Type | Development Kit Accessory | |
| For Use With | 38-pin Mictor Interface, 20-pin 0.1 in J-Link Interface | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 SEGGER | ||
Accessory Type Adapter | ||
Product Type Development Kit Accessory | ||
For Use With 38-pin Mictor Interface, 20-pin 0.1 in J-Link Interface | ||
Standards/Approvals No | ||
The SEGGER J-Link Mictor 38 Adapter connects the standard 20-pin 0.1" J-Link interface to the 38-pin Mictor interface. The pinout follows the single target connector pinout specification as defined in the ARM "ETM Architecture Specification".
Adapter connects the GND and JTAG pins to their counterparts on the 20-pin J-Link
38-pin Mictor side of the adapter can be plugged either directly into the target side or via trace cable
J-Link side connects to J-Link via 20-pin flat cable
相關連結
- SEGGER 8.06.21 J-Trace Mictor 38 Adapter Adapter for use with 38 Pin Mictor Connector, 19 Pin Cortex-M Connector
- SEGGER 8.06.16 J-Link 6-pin Needle Adapter Adapter for use with J-Link
- SEGGER 8.06.01 J-Link RX Adapter Adapter for use with J-Link Probes
- SEGGER 8.06.19 J-Link Xilinx Adapter Adapter
- SEGGER 8.06.04 J-Link 10-Pin Needle Adapter Adapter for use with J-Link Probes
- SEGGER 8.06.18 J-Link Target Supply adapter Adapter for use with J-Link Probes
- SEGGER 8.08.01 J-Link ARM-14 Adapter Adapter for use with J-Link Probes
- SEGGER 8.06.03 J-Link 14-Pin TI Adapter Adapter