透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Microchip
	Product Type	Development Kit Accessory
	For Use With	Debugging and Programming ARM Cortex-M
	Standards/Approvals	No

	選取全部
	品牌 Microchip
	Product Type Development Kit Accessory
	For Use With Debugging and Programming ARM Cortex-M
	Standards/Approvals No

Power Debugger

The Power Debugger is a powerful development tool for debugging and programming AVR microcontrollers. The tool is using UPDI, JTAG, PDI, debugWIRE, aWire, TPI or SPI target interfaces. It is using JTAG or SWD target interfaces for the ARM Cortex-M based SAM microcontrollers.

Extra features of the Power Debugger are two independent current sensing channels for measuring and optimising the power consumption.

A CDC virtual COM port and Data Gateway channels are included for streaming data to the host computer from a SPI, USART, TWI or GPIO source.

The Power Debugger is a CMSIS-DAP compatible debugger that streams power measurements and application debugging data to Data Visualiser for real-time analysis.

Supports UPDI, JTAG, SWD, PDI, TPI, aWire, SPI and debugWIRE interfaces

Voltage and Current simultaneous measurements on two independent channels

USB feed-through connection for easy measurement of current consumption of USB powered target board

USB powered

Adjustable 1.62 V to 5.5 V power supply operation

ARM Cortex Debug Connector (10-pin) pin-out

AVR JTAG connector pin-out

CDC virtual COM port interface

Power Debugger Kit Contents

Main unit with plastic back plate

USB cables (2)

Squid cable 10-lead

Flat cable (10-pin 50 mil connector and 6-pin 100 mil connector)

Adapter board (20-pin 100 mil connector, 6-pin 50 mil connector and 10-pin 100 mil connector)

Jumper cable 20-pin 100 mil

單位	每單位
1 - 4	TWD11,625.00
5 +	TWD11,392.00

Microchip ATPOWERDEBUGGER for use with Debugging and Programming ARM Cortex-M

訂單超過 $1,300.00 免費送貨

Power Debugger

Power Debugger Kit Contents

Generic Development Tools

相關連結