SEGGER J-Link PRO Emulator
- RS庫存編號:
- 131-1322
- 製造零件編號:
- 8.12.00 J-Link PRO
- 製造商:
- SEGGER
可享批量折扣
單價 個**
TWD36,983.00
(不含稅)
TWD38,832.15
(含稅)
18 現貨庫存，可於6工作日發貨。*
* 交貨日期可能會根據您選擇的數量和交貨地址而變更。
訂單金額滿 TWD2,857.00 (未稅) 即可享受 免費 送貨服務
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD36,983.00 |
| 5 + | TWD35,874.00 |
** 參考價格
- RS庫存編號:
- 131-1322
- 製造零件編號:
- 8.12.00 J-Link PRO
- 製造商:
- SEGGER
J-Link PRO Probe
J-Link PRO is a JTAG/SWD programming and debug probe supporting a large number of processor cores and comes with integrated licenses for unlimited breakpoints in Flash memory, RDI/RDDI, GDB Server and J-Flash. An Ethernet connection allows use of the debug probe far away from the PC, over a hard-wired or wireless network.
Supported Processors
• ARM7/9/11, Cortex-A5/A8/A9, Cortex-M0/M1/M3/M4/M7, Cortex-R4/R5
• Microchip PIC32
• Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
• Microchip PIC32
• Renesas RX100/RX200/RX610/RX621/RX62N/RX62T/RX630/RX631/RX63N
Features
• Direct download into Flash memory of most microcontrollers supported
• Download speed up to 3MB/sec
• 10/100 Ethernet via RJ45 socket
• Web interface for easy TCP/IP configuration (built-in webserver)
• Supports concurrent access to CPU by multiple applications
• Automatic core recognition
• Supports multiple target interfaces: JTAG, SWD
• Supports SWD/SWV (Serial Wire Debug / Serial Wire Viewer)
• Supports J-Flash Production Flash programming
• Maximum target interface speed: 50MHz
• Maximum SWO sampling speed: 100MHz
• Wide target voltage range: +1.2V to +5Vdc
• Embedded Trace Buffer (ETB) support
• Various target adapters and optical isolation adapters available
• RDI / RDDI interface
• Powered via USB connector
• Support for adaptive clocking
• All JTAG signals can be monitored, target voltage can be measured
• Target power supply: 300mA with overload protection
• Target interface: JTAG/SWD 20-pin
• PC interface: USB 2.0 HS or Ethernet RJ45 socket
• Galvanic isolation from host system via Ethernet
• Power and RESET LEDs
• Dimensions: 100 x 53 x 27mm
• Cross-platform support (runs on Windows, Linux, Mac OS X)
• Memory viewer (J-Mem) included
• Software Developer Kit (SDK) available
• Free software updates, 2 years of support
• Download speed up to 3MB/sec
• 10/100 Ethernet via RJ45 socket
• Web interface for easy TCP/IP configuration (built-in webserver)
• Supports concurrent access to CPU by multiple applications
• Automatic core recognition
• Supports multiple target interfaces: JTAG, SWD
• Supports SWD/SWV (Serial Wire Debug / Serial Wire Viewer)
• Supports J-Flash Production Flash programming
• Maximum target interface speed: 50MHz
• Maximum SWO sampling speed: 100MHz
• Wide target voltage range: +1.2V to +5Vdc
• Embedded Trace Buffer (ETB) support
• Various target adapters and optical isolation adapters available
• RDI / RDDI interface
• Powered via USB connector
• Support for adaptive clocking
• All JTAG signals can be monitored, target voltage can be measured
• Target power supply: 300mA with overload protection
• Target interface: JTAG/SWD 20-pin
• PC interface: USB 2.0 HS or Ethernet RJ45 socket
• Galvanic isolation from host system via Ethernet
• Power and RESET LEDs
• Dimensions: 100 x 53 x 27mm
• Cross-platform support (runs on Windows, Linux, Mac OS X)
• Memory viewer (J-Mem) included
• Software Developer Kit (SDK) available
• Free software updates, 2 years of support
Target Adapters & Adapter Cables
• 131-1325 J-Link Target Power Supply Adapter
• 131-1326 J-Link 10-pin Needle Adapter
• 131-1327 J-Link RX100/200/600 MCU Adapter
• 131-1328 J-Link 19-pin ARM Cortex-M MCU Adapter
• 131-1329 J-Link 9-pin ARM Cortex-M MCU Adapter
• 131-1330 J-Link 14-pin ARM 7/9/11 MCU Adapter
• 131-1331 J-Link Microchip PIC32 MCU Adapter
Link Isolator Boards
• 131-1335 J-Link ARM JTAG Isolator Board
• 131-1336 J-Link ARM SWD Isolator Board
• 131-1337 J-Link USB Isolator Board
Supplied with
USB cable, 20-pin ribbon cable
屬性 | 值 |
|---|---|
| Kit Name | J-Link PRO Emulator |
| For Use With | Flash microcontrollers |
| Product Type | Programmer |